VigorSwitch G2260 Authentication By Client MAC Address

包含Smart Switch/L2 Switch/L3 Switch/L4 Switch.....
ARP病毒的防護,房東的最愛
Wireshark討論區 , Wireshark應用與討論
Sniffer的應用與討論

VigorSwitch G2260 Authentication By Client MAC Address

文章門神 » 週四 9月 26日, 2013年 9:04 am

VigorSwitch G2260 Authentication By Client MAC Address
如何使用網路卡卡號驗證
圖檔
我們這次先用winRadius做教學設定的示範
Windows 2003 Server就安裝IAS Service
Windows 2008 Server就安裝NPS Service
Windows 2012 Server一樣就新增角色NPS
Authentication by Mac Address的優點在那邊
他不用像802.1x的PEAP還要匯入CA
如果是一般的事務機或是手機
您怎麼匯入CA的Key ^^
也不用像EAP的PAP還要去打開Wire Authentication的Service
網路印表機伺服器沒有此選項吧 ^^

他最大的優點是只要是他認可的MAC Address就可以通過了
Client端都不需要設定或是匯入任何的東東
而且Switch端的設定也超級簡單
不管你有幾百台的Switch
只需要用同一台Radius Server驗證就可以了

winRadius Server是可以安裝在Windows XP上的Radius Server
我們先說明VigorSwitch G2260這一端的設定
圖檔

登進VigorSwitch G2260
選 Security
NAS
General Setup
Mode:改選Enable
我們建議把Reauthentication Period 點選一下
因為如果有換設備他可以再驗證一次
圖檔

我們實驗的是接在Switch Port 8的Windows 8.1的電腦
把他選為MAC-based Auth.
他的MAC Address是00-18-f3-f7-45-d1
圖檔

然後要設定AAA
General Setup
RADIUS Authorization Server Configuration
#1 Enabled
IP Address/Hostname
Secret 我們是定義成vigor
圖檔

所以 WinRadius 這邊
Settings
System settings
NAS Secret改為Vigor
圖檔

Operation這邊要add user
他的驗證 User name和Password都是Client的MAC Address
00-18-f3-f7-45-d1
點OK之後
圖檔

在NAS
Switch Status
就可以看見他已經通過驗證了

也可以直接使用我們整機包裝的URS驗證伺服器
http://www.ublink.org/index.php/2010-02 ... wifi-.html

以上產品如果有其他問題
請洽本公司各區服務處
北:02-2932-1422 , help@farich.com.tw
中:04-2260-5121 , help@ublink.org
南:07-359-1912 , kshelp@ublink.org
ps:求助順序請直接
(1)電洽 04-2260-5121 / 0963-685-121
(2)http://line.naver.jp/ti/p/%40xat.0000132120.jmw 技術客服 LINE
(3)問題請優先洽詢 help@ublink.org
Telegram 頻道 Channel https://t.me/ublinkorg 韌體更新發佈
其他線上聯絡方式,http://www.ublink.org/index.php/contact
頭像
門神
 
文章: 6265
註冊時間: 週五 12月 8日, 2006年 11:10 am
來自: 台中
送出感謝: 16
擁有感謝: 0 次

回到 Switch特殊應用討論專區

誰在線上

正在瀏覽這個版面的使用者:沒有註冊會員 和 4 位訪客

cron