Vigor3220 Series v3.8.9 Release
![文章 文章](./styles/prosilver/imageset/icon_post_target.gif)
NO:AP1101-2 V.1
Release Note for Vigor3220 Series
Firmware Version:
3.8.9
Release Type:
Normal
Applied Models:
Vigor3220/Vigor3220n
Vigor3220 Series, a broadband router, integrat
es IP layer QoS, NAT session/bandwidth
management to help users contro
l works well with large bandwidth.
By adopting hardware-based VPN platform and ha
rdware encryption of AES/DES/3DES, the router
increases the performance of VPN greatly, and offe
rs several protocols (s
uch as IPSec/PPTP/L2TP)
for
VPN tunnels.
New Features
Support VigorACS 2 (firmware version:2.3.0).
Add AP-assisted Client Roaming set
tings on Central Management>>AP>>WLAN
Profile.
Add dashboard control page in System
Maintenance>>Dashboard Control.
Add RMM (Remote Monitoring & Management) mechanism into Vigor router.
Support DrayOS IKEv1 IPSec XAuth for the security of network connection.
Support SMS One Time Password (OTP) for
VPN / Remote Management (2FA, two
factor authentication).
Improvement
Improved: Add more 802.1X met
hods for Internal RADIUS
(Applications>>RADIUS/TACACS+) & Lo
cal 802.1X (Applica
tions>>Local 802.1X
General Setup).
Improved: Modify the firmware upgrade head
er information display after clicking the
Upgrade button in System Maintenance>>Firmware Upgrade.
Improved: Modify the notes in App
lications>>Local 802.1X General Setup.
Add an Advanced button to offer more direct
ion options in firewall rule (Firewall>>Edit
Filter Set>>Edit Filter Set).
Improved: Support SSL/TLS authenticati
on for Local 802.1X (Applications>>Local
802.1X General Setup).
Improved: Add backup/restore buttons to
VPN and Remote Access>>Remote Dial-in
User.
Improved: Support “Use Cycle in hours” for Custom setting in WAN>>WAN budget.
- 2 -
Improved: Extend the certificate
size of Vigor router (for
the Certificate Chain Issue).
Improved: Increase X.509 Certificate import size.
Improved: Change the default setti
ng for DMZ port IP
address as 192.168.254.1
(LAN>>General Setup).
Improved: Import X.509 certificate via SSH (mngt cert_import cmd).
Improved: Improve the web user interf
ace of VPN status (VPN and Remote
Access>>Connection Management).
Improved: Support multi-gateway in LAN subnet.
Improved: Allow conditional Bind IP to MAC based upon network entry point.
Improved: Support Channel Width selecti
ons on Central Management >>AP >> WLAN
Profile.
Improved: Support WAN DHCP option
121 for adding new static route.
Improved: Change default settings of WAN MTU, Time and Date for country code, PL.
Improved: Support Diffie-Hellman group 19
as Proposal setting on VPN and Remote
Access>>VPN Profiles.
Corrected: FlowControl for WAN1 was alwa
ys OFF while using the telnet command
“port status”.
Corrected: Unable to display a router
icon in Central Management>>VPN>>CPE
Management>>Managed Devices List.
Corrected: Unable to display DDNS Log by clicking View Log in
Applications>>Dynamic DNS Setup.
Improved: Remove the unnecessary not
e "We only support LAN1 for PPPoE
Pass-through" in WAN>>Internet Access>> WAN2 >> PPPoE.
Corrected: Typo in VPN and Remote Access>>IPsec General Setup page.
Corrected: Overnight schedul
e profile did not work.
Corrected: The firewall default rule block w
ould block the DNS response if LAN client
used Vigor as the DNS server.
Corrected: Port redirection configured via te
lnet took no effect until disabling and then
enabling it.
Corrected: NAT Port Redirection rule with TC
P protocol could not
be enabled (yet, UDP
protocol could).
Corrected: UBDDNS didn't work.
Corrected: Abnormal page display (i
nformation missing) on the dashboard.
Corrected: WAN VLAN Tag 7 was wrongly set in default for Vigor router.
Corrected: When connecting two WAN ports
to one switch and reboot by web user
interface, Vigor router would hang up.
Corrected: The character “ used for Pre-
Shared Key(PSK) on Wireless LAN>>Security
would cause abnormal page display.
Corrected: Vigor router sent strange DNS que
ry when Syslog / Mail Alert was enabled.
Corrected: Session limit blocked dial-in VPN users.]
Release Note for Vigor3220 Series
Firmware Version:
3.8.9
Release Type:
Normal
Applied Models:
Vigor3220/Vigor3220n
Vigor3220 Series, a broadband router, integrat
es IP layer QoS, NAT session/bandwidth
management to help users contro
l works well with large bandwidth.
By adopting hardware-based VPN platform and ha
rdware encryption of AES/DES/3DES, the router
increases the performance of VPN greatly, and offe
rs several protocols (s
uch as IPSec/PPTP/L2TP)
for
VPN tunnels.
New Features
Support VigorACS 2 (firmware version:2.3.0).
Add AP-assisted Client Roaming set
tings on Central Management>>AP>>WLAN
Profile.
Add dashboard control page in System
Maintenance>>Dashboard Control.
Add RMM (Remote Monitoring & Management) mechanism into Vigor router.
Support DrayOS IKEv1 IPSec XAuth for the security of network connection.
Support SMS One Time Password (OTP) for
VPN / Remote Management (2FA, two
factor authentication).
Improvement
Improved: Add more 802.1X met
hods for Internal RADIUS
(Applications>>RADIUS/TACACS+) & Lo
cal 802.1X (Applica
tions>>Local 802.1X
General Setup).
Improved: Modify the firmware upgrade head
er information display after clicking the
Upgrade button in System Maintenance>>Firmware Upgrade.
Improved: Modify the notes in App
lications>>Local 802.1X General Setup.
Add an Advanced button to offer more direct
ion options in firewall rule (Firewall>>Edit
Filter Set>>Edit Filter Set).
Improved: Support SSL/TLS authenticati
on for Local 802.1X (Applications>>Local
802.1X General Setup).
Improved: Add backup/restore buttons to
VPN and Remote Access>>Remote Dial-in
User.
Improved: Support “Use Cycle in hours” for Custom setting in WAN>>WAN budget.
- 2 -
Improved: Extend the certificate
size of Vigor router (for
the Certificate Chain Issue).
Improved: Increase X.509 Certificate import size.
Improved: Change the default setti
ng for DMZ port IP
address as 192.168.254.1
(LAN>>General Setup).
Improved: Import X.509 certificate via SSH (mngt cert_import cmd).
Improved: Improve the web user interf
ace of VPN status (VPN and Remote
Access>>Connection Management).
Improved: Support multi-gateway in LAN subnet.
Improved: Allow conditional Bind IP to MAC based upon network entry point.
Improved: Support Channel Width selecti
ons on Central Management >>AP >> WLAN
Profile.
Improved: Support WAN DHCP option
121 for adding new static route.
Improved: Change default settings of WAN MTU, Time and Date for country code, PL.
Improved: Support Diffie-Hellman group 19
as Proposal setting on VPN and Remote
Access>>VPN Profiles.
Corrected: FlowControl for WAN1 was alwa
ys OFF while using the telnet command
“port status”.
Corrected: Unable to display a router
icon in Central Management>>VPN>>CPE
Management>>Managed Devices List.
Corrected: Unable to display DDNS Log by clicking View Log in
Applications>>Dynamic DNS Setup.
Improved: Remove the unnecessary not
e "We only support LAN1 for PPPoE
Pass-through" in WAN>>Internet Access>> WAN2 >> PPPoE.
Corrected: Typo in VPN and Remote Access>>IPsec General Setup page.
Corrected: Overnight schedul
e profile did not work.
Corrected: The firewall default rule block w
ould block the DNS response if LAN client
used Vigor as the DNS server.
Corrected: Port redirection configured via te
lnet took no effect until disabling and then
enabling it.
Corrected: NAT Port Redirection rule with TC
P protocol could not
be enabled (yet, UDP
protocol could).
Corrected: UBDDNS didn't work.
Corrected: Abnormal page display (i
nformation missing) on the dashboard.
Corrected: WAN VLAN Tag 7 was wrongly set in default for Vigor router.
Corrected: When connecting two WAN ports
to one switch and reboot by web user
interface, Vigor router would hang up.
Corrected: The character “ used for Pre-
Shared Key(PSK) on Wireless LAN>>Security
would cause abnormal page display.
Corrected: Vigor router sent strange DNS que
ry when Syslog / Mail Alert was enabled.
Corrected: Session limit blocked dial-in VPN users.]