VigorAP810 v1.2.3.1 Release Note

版主: david

VigorAP810 v1.2.3.1 Release Note

文章門神 » 週二 12月 26日, 2017年 11:50 am

- 1 -
Release Note for VigorAP 810
Firmware Version: 1.2.3.1
Release Type: Normal
Applied Models: VigorAP 810
With this high cost-efficiency VigorAP 810, computers and wireless devices which are compatible
with 802.11n can connect to existing wired Ethernet network via this VigorAP 810, at the speed of
300Mbps. Easy install procedures allows users to setup a network environment in very short time -
within minutes, even inexperienced users. Just follow the instructions given in this user manual, you
can complete the setup procedure and release the power of this access point all by yourself!
New Features
None.
Improvement
Improved: A wireless vulnerability, known as 'KRACK' was discovered in October 2017.
This affected wireless clients, including phones, tablets, laptops and also any wireless
base acting as a client.
For full details, see https://www.krackattacks.com. The recommended action in all cases
is to upgrade your client devices as that is where the vulnerability lies however if that is
impossible because the product is too old or the vendor does not provide updates, it is
possible to mitigate KRACK exploitation by disabling EAPOL-Key retries on the base
station and reduce the possibility of KRACK being used. For more details, see
https://www.krackattacks.com/#ap-mitigations. That can be done from "Wireless LAN >>
Security Settings" on the access point. Upgrading your client is still the preferable
solution.
Known Issue
None.
Notes
None.
- 2 -
RD NO: 106_11_21
ps:求助順序請直接
(1)電洽 04-2260-5121 / 0963-685-121
(2)http://line.naver.jp/ti/p/%40xat.0000132120.jmw 技術客服 LINE
(3)問題請優先洽詢 help@ublink.org
Telegram 頻道 Channel https://t.me/ublinkorg 韌體更新發佈
其他線上聯絡方式,http://www.ublink.org/index.php/contact
頭像
門神
 
文章: 6265
註冊時間: 週五 12月 8日, 2006年 11:10 am
來自: 台中
送出感謝: 16
擁有感謝: 0 次

回到 Draytek 軔體更新討論區

誰在線上

正在瀏覽這個版面的使用者:沒有註冊會員 和 4 位訪客