Vigor3900 v1.3.2 Release Note

版主: david

Vigor3900 v1.3.2 Release Note

文章門神 » 週二 12月 26日, 2017年 11:48 am

1
Release Note for Vigor3900 Series
Firmware Version: 1.3.2
Release Type: Normal
Applied Models: Vigor3900
Due to the firmware size limitation, for devices using firmware version 1.0.5 or earlier, it is
suggested to upgrade to firmware version 1.0.7.1 first before upgrading to version 1.0.8.x and later.
New Features
Support Fast NAT function to reduce CPU loading (in NAT>>Fast NAT).
Improvement
Improved: Update Deutsch translation for web user interface.
Corrected: Failed to view the configured URL Filter Profile (empty content).
Corrected: Correct the rate unit for Filtering Rate in Firewall>>DoS Defense>> Switch
Rate Limit>>Storm Filter.
Corrected: HTTPS access barrier blocked remote https connection even the user had
logged in.
Corrected: A potential error which might result in flooding WAN removed from load
balance pool forever.
Corrected: URL/Web category filter counter didn't count for blocked https websites.
Corrected: LDAP should not bind request with Root when doing a regular search.
Corrected: Incorrect HTTPS filtering when using dot '.' as keyword.
Corrected: Router reboot when file extension firewall was enabled.
Corrected: HA did not fail over to secondary router when all WANs of primary router
were down.
Corrected: VLANs were not accessible through VPN trunk when the backup VPN was
up.
Corrected: VPN did not route packets after PPPoE WAN was down and then up
repeatedly.
Corrected: IPsec VPN dial out failed for hostname starting with number.
Corrected: Unable to show any profile name for IPsec in VPN and Remote
Access>>Connection Management. Error message of “Lack of Ptype..” appeared
unexpectedly.
Corrected: Web portal might not work with IP filter rules.
2
Improved: Improve bandwidth limit inaccurate rate issue.
Improved: APM broadcast to VPN is disabled in default. Option of “Pass-Through VPN”
for enabling/disabling the APM broadcast has been added.
Corrected: Web Portal Login page took long time to appear.
Improved: Offer more quantities of Service Type object for QoS and Firewall.
Improved: IPsec VPN stability improvement.
Improved: Updated DNSMasq package to address security issues under CVE-2017-14491,
CVE-2017-14492, CVE-2017-14493, CVE-2017-14494, CVE-2017-14495,
CVE-2017-14496 and CVE-2017-13704.
(http://www.draytek.com/en/news/news/201 ... -vulnerabi
lity/)
Known Issue
VPN Trunk tunnel doesn't work well when the profile name is more than 15 characters.
You need to disable "Force IPsec with L2TP" options for pure L2TP tunnel in VPN and
Remote Access >> PPP General Setup.
Notes
None
RD NO: 106_11_27
ps:急件請直接電洽
技術問題請優先洽詢 help@ublink.org

如果我們的回答您真的看不懂
請將設備的問題和IP
以及管理者的ID/Password
Mail到help@ublink.org
電話溝通讓工程師直接登入IP查看

如有其它問題,歡迎與我聯繫,謝謝您。
04-2260-5121(LineID:0932976167)
門神JanusLin
skype:janus-lin
FB:https://www.facebook.com/ublinknetwork
圖檔
頭像
門神
 
文章: 5659
註冊時間: 週五 12月 8日, 2006年 11:10 am
來自: 台中
送出感謝: 16
擁有感謝: 0 次

回到 Draytek 軔體更新討論區

誰在線上

正在瀏覽這個版面的使用者:沒有註冊會員 和 4 位訪客