Vigor3220 Series v3.8.4.1 Release

版主: david

Vigor3220 Series v3.8.4.1 Release

文章門神 » 週三 10月 18日, 2017年 8:30 am

- 1 -
NO:AP1101-2 V.1
Release Note for Vigor3220 Series
Firmware Version: 3.8.4.1
Release Type: Normal
Applied Models: Vigor3220/Vigor3220n
Vigor3220 Series, a broadband router, integrates IP layer QoS, NAT session/bandwidth
management to help users control works well with large bandwidth.
By adopting hardware-based VPN platform and hardware encryption of AES/DES/3DES, the router
increases the performance of VPN greatly, and offers several protocols (such as IPSec/PPTP/L2TP)
with up to 100 VPN tunnels (including 50 SSL VPN tunnels).
New Features
Support VigorACS 2.0.
Improvement
Improved: Enhance the stability of SSH Server.
Improved: Enhance the stability of switch management.
Improved: Firewall supports PPTP ALG session.
Improved: Text adjustment for LAN >> VLAN page.
Improved: Modify the wording on Applications>>IGMP.
Improved: Modify the wording on Firewall>>General Setup.
Improved: Add a note that only USB 2 can be used for USB 3G/4G modem on
WAN>>Internet Access.
Improved: Add the option of Force router to use DNS server IP address on LAN >>
General Setup webpage.
Improved: Set Inter-LAN routing between DMZ and LAN1 when DMZ is enabled.
Improved: Enhance the stability when domain name is set on System Maintenance >>
SysLog / Mail Alert Setup >> Server IP Address.
Corrected: The password configured for setting backup in System
Maintenance>>Configuration Backup was not encrypted.
Corrected: Enhanced the stability when DoS ICMP flood defense was enabled.
Corrected: Improvement for IPsec throughput.
Corrected: CSM blocked petlog.org.uk as "Uncategorized" due to wrong classification
made by WCF.
Corrected: Hardware Acceleration did not work when the firewall function was disabled.
- 2 -
Corrected: SNMP responding on the WAN when Internet management turned on and IP
was not a Manager Host IP in SNMP page.
Corrected: NAT loopback did not work in LAN routing.
Corrected: The start date for a new Root CA certificate was not the date that the certificate
created but late for one day.
Corrected: Unable to build network connection via WAN interface after enabling Session
Limit.
Corrected: NAT >> Open Ports did not work with WAN IP alias.
Corrected: Bandwidth Limit did not work properly.
Known Issue
None.
RD NO: 106_02_23
ps:
技術問題請優先洽詢 help@ublink.org

如果我們的回答您真的看不懂
請將設備的問題和IP
以及管理者的ID/Password
Mail到help@ublink.org
電話溝通讓工程師直接登入IP查看

如有其它問題,歡迎與我聯繫,謝謝您。
04-2260-5121(LineID:0932976167)
門神JanusLin
skype:janus-lin
FB:https://www.facebook.com/ublinknetwork
圖檔
頭像
門神
 
文章: 5620
註冊時間: 週五 12月 8日, 2006年 11:10 am
來自: 台中
送出感謝: 16
擁有感謝: 0 次

回到 Draytek 軔體更新討論區

誰在線上

正在瀏覽這個版面的使用者:沒有註冊會員 和 2 位訪客