VigorAP910C v1.2.1 Release Note

版主: david

VigorAP910C v1.2.1 Release Note

文章門神 » 週一 8月 7日, 2017年 3:48 pm

- 1 -
Release Note for VigorAP 910C
Firmware Version: 1.2.1
Release Type: Normal
Applied Models: VigorAP 910C
VigorAP 910C is a ceiling mount Access Point with PoE for offering power supply and support
300Mbps @2.4GHz, and 866Mbps @5GHz (11ac).
New Features
Add TR-069 parameters required by VigorACS 2.0.2.
Add a new option for disabling wireless connection automatically if there is no Internet
access.
Add 5G SSID isolation support.
Improvement
Improved: Web firmware upgrade sporadically failed issue can now be detected and
prevented by guiding user with extra WUI warnings and buttons.
Improved: Add more parameters for wireless traffic statistics.
Improved: Improve the mechanism and the layout for "System Maintenance >>
Configuration Backup" WUI.
Improved: Configure 5G TX power via APM is now supported.
Improved: Device Name in System Maintenance>>Management can now be set with
longer than 15 characters.
Corrected: APM (AP Management) could not connect to AP910C when using
WPA2/802.1x Security Mode.
Corrected: Data Flow Monitor WUI might get stuck issue.
Corrected: Wireless driver related bug fixed.
Known Issue
Firmware version 1.2.0 may cause firmware upgrade failure while upgrading firmware
from web user interface. When meeting firmware upgrade failure, please reboot VigorAP
910C and use Firmware Upgrade Utility to perform the firmware upgrade by a PC
connected to LAN port of VigorAP 910C.
- 2 -
Notes
None
RD NO: 106_07_14
ps:
技術問題請優先洽詢 help@ublink.org

如果我們的回答您真的看不懂
請將設備的問題和IP
以及管理者的ID/Password
Mail到help@ublink.org
電話溝通讓工程師直接登入IP查看

如有其它問題,歡迎與我聯繫,謝謝您。
04-2260-5121(LineID:0932976167)
門神JanusLin
skype:janus-lin
FB:https://www.facebook.com/ublinknetwork
圖檔
頭像
門神
 
文章: 5622
註冊時間: 週五 12月 8日, 2006年 11:10 am
來自: 台中
送出感謝: 16
擁有感謝: 0 次

回到 Draytek 軔體更新討論區

誰在線上

正在瀏覽這個版面的使用者:沒有註冊會員 和 2 位訪客