1 頁 (共 1 頁)

Vigor2960 v1.3.1 Release Note

文章發表於 : 週五 8月 4日, 2017年 9:21 am
門神
- 1 -
NO:AP1101-2 V.1
Release Note for Vigor2960
Firmware Version: 1.3.1
Release Type: Normal
Applied Models: Vigor2960 Series
Vigor2960, a firewall broadband router with dual-WAN interface, can connect to
xDSL/cable/VDSL2/Ethernet FTTx. The dual-WAN and 4-port gigabit LAN switch facilitates
unified communication applications in business CO/remote site to handle large data from
subscribed fatter pipe. The state-of-art routing feature, VPN security, and Dual-WAN provide
integrated benefits for professional users and small offices.
Due to the firmware size limitation, for devices using firmware version 1.0.5 or earlier, it is
suggested to upgrade to firmware version 1.0.7.1 first before upgrading to version 1.0.9 or
later.
New Features
Add Fast Route function to reduce CPU loading (Routing>>Fast Route).
Improvement
Improved: Improvements to make security updates for Samba service (CVE-2017-7494).
Improved: Update SSH server to new version (2016.74).
Improved: Update APP signatures for Hotspot, UltraSurf, PPstream and Google
Hangouts.
Improved: Add "Source IP Based" scheduler for server’s Load Balance.
Improved: Add "Select All" for WLAN Profile/AP Maintenance for AP management.
Corrected: The second user was unable to login web portal by SMS authentication.
Corrected: Settings for PPTP was unable to be applied in User Management>>User
Profile>>Apply All.
Corrected: IPsec VPN was unable to fail over via other WAN interface.
Corrected: DNS might stop working suddenly.
Corrected: IPv6 did not work properly on WAN DHCPv6 PD (IAID).
Corrected: IKEv2 didn't work with iPhone/iPad since iOS 10.3.1.
Corrected: XAuth VPN could not connect if character "#" or "." set in password.
- 2 -
Corrected: DDNS Strato didn’t work.
Corrected: High percentage of the CPU usage when running PPPoE server for more than
100 clients.
Corrected: Vigor router might crash if China WCF was enabled.
Corrected: IPv6 Ping diagnostics didn't show the diagnosis result.
Corrected: Switch Hierarchy was displayed incorrectly.
Known Issue
You need to disable "Force IPsec with L2TP" options for pure L2TP tunnel in VPN and
Remote Access >> PPP General Setup.
After upgrading to firmware version 1.2.0, Vigor2960 using the new MXIC and “nand”
flash cannot downgrade to the previous firmware version 1.1.0.2. We can check the flash
by CLI command "status system".
Model : Vigor2960
Hardware Version : 1.0 (M) <---------------- (M) for MXIC Flash
Hardware Version : 1.0 <---------------- none for the original Samsung Flash
Please email to support@draytek.com to get the special firmware if you want to
downgrade to the previous firmware version.
HA configuration is not compatible. Firmware version 1.2.0 only supports one HA profile
while the previous firmware version supports 3. The primary/ secondary role field is
removed in the new firmware version also. A user will need to reconfigure HA settings.
Notes
None
RD NO: 106_06_20

Re: Vigor2960 v1.3.1 Release Note

文章發表於 : 週二 10月 17日, 2017年 11:36 pm
c3068
更新完還是 1.3.0

Re: Vigor2960 v1.3.1 Release Note

文章發表於 : 週三 10月 18日, 2017年 7:59 am
門神
請將 ip/password和問題 Mail 到 help@ublink.org
3Q