VigorAP810 v1.2.2 Release Note

版主: david

VigorAP810 v1.2.2 Release Note

文章門神 » 週五 8月 4日, 2017年 8:49 am

- 1 -
Release Note for VigorAP 810
Firmware Version: 1.2.2
Release Type: Normal
Applied Models: VigorAP 810
With this high cost-efficiency VigorAP 810, computers and wireless devices which are compatible
with 802.11n can connect to existing wired Ethernet network via this VigorAP 810, at the speed of
300Mbps. Easy install procedures allows users to setup a network environment in very short time -
within minutes, even inexperienced users. Just follow the instructions given in this user manual, you
can complete the setup procedure and release the power of this access point all by yourself!
New Features
Add TR-069 parameters for functions of Wireless LAN (2.4GHz)>>WMM Configuration
and Bandwidth Management, Applications>> Temperature Sensor Graph,
Applications>>Schedule, LAN>>Port Control, Applications >> Apple iOS Keep Alive,
and AP Applications >> Auto Switch On/Off Wi-Fi.
Add parameters related to wireless transmission / receiving traffic.
Improvement
Improved: VigorAP, even changing the LAN port connection, can get the same IP from
DHCP server of Vigor router.
Corrected: VigorAP did not respond to VigorACS after Configuration >>Wireless LAN >
>2.4G >> Security configured via VigorACS.
Improved: Add TR-069 parameters for some settings (e.g., Telnet Server) in System
Maintenance>>Management and System Maintenance >>Time and Date.
Known Issue
None.
Notes
None
RD NO: 106_07_28
ps:求助順序請直接
(1)電洽 04-2260-5121 / 0963-685-121
(2)http://line.naver.jp/ti/p/%40xat.0000132120.jmw 技術客服 LINE
(3)問題請優先洽詢 help@ublink.org
Telegram 頻道 Channel https://t.me/ublinkorg 韌體更新發佈
其他線上聯絡方式,http://www.ublink.org/index.php/contact
頭像
門神
 
文章: 6265
註冊時間: 週五 12月 8日, 2006年 11:10 am
來自: 台中
送出感謝: 16
擁有感謝: 0 次

回到 Draytek 軔體更新討論區

誰在線上

正在瀏覽這個版面的使用者:沒有註冊會員 和 14 位訪客

cron