1 頁 (共 1 頁)

VigorAP902 v1.2.0 Release Note

文章發表於 : 週五 4月 28日, 2017年 3:46 pm
門神
- 1 -
Release Note for VigorAP 902
Firmware Version: 1.2.0
Release Type: Normal
Release Date: January 20, 2017
Applied Models: VigorAP 902
With this high cost-efficiency VigorAP 902, computers and wireless devices which are compatible
with 802.11ac can connect to existing wired Ethernet network via this VigorAP 902. Easy install
procedures allows users to setup a network environment in very short time - within minutes, even
inexperienced users.
New Features
Add Channel option for Universal Repeater mode while configuration through Quick
Start Wizard.
Add Wi-Fi interference monitor mechanism (Diagnostics>>Interference Monitor) for
all wireless channels.
Support USB thermometer.
Support Data Flow Monitor.
Support Diagnostics>>Station Airtime, Diagnostics>>Station Traffic Graph,
Diagnostics>>Station Link Speed for Airtime Fairness diagnosis.
The option for Limit Client Number can be configured for each SSID.
Add Bandwidth Management for wireless LAN.
Configuration of VigorAP 900 can be accepted by and restored in VigorAP 902.
Improvement
Improved: Offer a warning message to ask the user changing default admin password.
Improved: Enhance roaming performance.
Improved: The policy for Mobile Device Management.
Improved: Support LED enable/disable feature.
Improved: Wireless channel with the least interference can be seen and recommended by
clicking Channel Interference link on Wireless LAN>> Access Point Discovery. The
link of Channel interference will open the web page of Diagnostics >> Interference
Monitor.
Improved: Improve AP discovery.
Improved: Simplify Quick Start Wizard for network connection.
- 2 -
Improved: Move some settings (e.g, MAC Clone, Tx Power.) from Wireless
LAN>>General Setup to Wireless LAN>>Advanced Setting.
Improved: Support Auto Channel Filtered Out List (Wireless LAN>>Advanced
Settings and Wireless LAN>>General Setup). The selected wireless channels will be
discarded if Auto is selected as Channel selection mode.
Improved: Value for Key Renewal Interval is configured as “3600” in default for all
SSIDs.
Improved: The default bandwidth channel for 2.4GHz/5GHz wireless LAN is changed
into Auto 20/40 MHz.
Improved: Add an option to enable / disable Telnet server in System Maintenance >>
Management.
Improved: AirPrint could not search the Printer connected to VigorAP 902 when the
printer was in dormancy.
Improved: Improve the stability for wireless connection via WPA2/802.1x wireless
security mode.
Corrected: Diagnostics >> Speed Test sometimes couldn't work and failed to get the data.
Corrected: Unable to apply wireless LAN profile to VigorAP by central AP management.
Corrected: Central AP Management applied wrong WLAN mode (802.11a) for 5GHz.
Corrected: Schedule did not work based on customer's configuration (when the user
changed the value of administration account).
Corrected: The web user interface of VigorAP would be fully invalid and unable to be
accessed into if more than 7 user profiles created in RADIUS Setting>>RADIUS
Server.
Corrected: VigorAP default VLAN tag parameter could not be configured via VigorACS.
Corrected: Unexpected error occurred when “&” sign was used in Central Management
>>AP >> WLAN Profile.
Corrected: Fix the problem running IGMP stream via Wi-Fi.
Corrected: AirPlay could not work when VigorAP was set in Universal Repeater mode.
Corrected: Error occurred while executing speed test.
Corrected: LEDs displayed error due to the activation of schedule settings.
Corrected: Universal repeater (5G) didn't work when pass phrase contained ';' character
(semicolon).
Corrected: Fixed the problem that VigorAP was unable to register to AP management on
Vigor router.
Corrected: Query DNS for pool.ntp.org every 10 seconds when staying at Time and Date
page.
Corrected: VigorAP sent wrong RSSI value to router’s Central AP Management.
Corrected: Unable to apply wireless channel (8~11) configuration from Central AP
Management.
Corrected: Limit Client could not be “Disable” simultaneously when By Traffic option is
- 3 -
selected for Load Balance in VigorAPM and apply to VigorAP 902.
Corrected: Tx rate and Rx rate could not be shown correctly on Wireless LAN (5GHz)
>>Station List.
Known Issue
None
Notes
None