Vigor2960 v1.3.0 Release Note

版主: david

Vigor2960 v1.3.0 Release Note

文章門神 » 週五 3月 24日, 2017年 4:17 pm

- 1 -
NO:AP1101-2 V.1
Release Note for Vigor2960
Firmware Version: 1.3.0
Release Type: Normal
Release Date: March 9, 2017
Applied Models: Vigor2960 Series
Vigor2960, a firewall broadband router with dual-WAN interface, can connect to
xDSL/cable/VDSL2/Ethernet FTTx. The dual-WAN and 4-port gigabit LAN switch facilitates
unified communication applications in business CO/remote site to handle large data from
subscribed fatter pipe. The state-of-art routing feature, VPN security, and Dual-WAN provide
integrated benefits for professional users and small offices.
Due to the firmware size limitation, for devices using firmware version 1.0.5 or earlier, it is
suggested to upgrade to firmware version first before upgrading to version 1.0.9 or
New Features
Support IKEv2 for IPsec
Support Central Management for AP.
Support Central Management for Switch.
Add additional web (responsive version) pages for mobile device.
Support DNS Security in Applications.
Support Server Load balance feature.
Improved: Support Xauth for IPsec remote dial in VPN connection.
Improved: Support "Auto adjustment to make the best utilization of available bandwidth"
in bandwidth limit function.
Improved: Support TLS 1.2.
Improved: Improvement for Fail to Ban / Access Barrier.
Improved: Support User Object/Group and LDAP GRP in Bandwidth
Management>>Sessions /Bandwidth Limit page.
Improved: Add the notification sending mechanism when detecting another DHCP Server.
- 2 -
Improved: Add manual switch button for HA hot-standby mode.
Improved: Support Auto Timezone settings.
Improved: RADIUS page design.
Improved: Add guest profile to firewall.
Improved: Add VPN Mail Alert Delay option in Notification settings.
Improved: Traffic Graph >> CPU Usage diagram display.
Improved: Support dynamic prefix for IPv6 LAN.
Improved: Add an option to disable User Login Mail Alert.
Improved: VPN Profiles is allowed to be renamed.
Improved: Support VPN status (online/offline) shown on profile list page.
Improved: Allow to set gateway address for DHCP settings.
Improved: Support “Using SSL” to encrypt LDAP.
Improved: Support “Domain Main” instead of "LAN IP" for Web Portal Redirect page.
Improved: Support “OpenDNS” in DDNS.
Improved: Add “Login History” for web portal access.
Improved: Turn on WAN DHCP Client Mode by default.
Improved: Support schedule reboot only on weekdays.
Improved: Support wildcard in LAN DNS.
Improved: Support GRE tunnel for establishing VPN with Cisco router.
Improved: Support USB modem WeTelecom WM-D300.
Improved: Add an option “block all incoming traffic” for firewall default policy.
Improved: Support “Email Alert” for WAN status change.
Improved: Add “WAN IP Alias” in Ping/Trace Route.
Improved: Support STARTTLS for Mail Alert function.
Improved: Allow to view certification information in web user interface.
Improved: Support to modify the service provider option in DDNS setup page.
Improved: Add "Search" feature for IP/Service objects, groups, firewall rules, NAT, VPN
Improved: Add a Priority Graph hint button in Policy Route Priority field.
Improved: Add "Apply Settings to APs" in System Maintenance >> TR-069.
Improved: Add a button to clear the dead line time for guest user account.
Improved: Support updating DDNS by HTTPS and add “” as one of
the service provider hosts.
Improved: Support SSL VPN in Central Management for VPN.
Improved: Support SHA2 for SSH connection.
Improved: Add maximum login number option for guest users.
Improved: WAN interface can be specified for SSL VPN services.
Improved: Add source IP address for choosing in Port Redirection.
Improved: Add service object option in policy rule.
Improved: Support SPF/TXT DNS Record for WAN Inbound Load Balance feature.
- 3 -
Improved: Support “Change Default Route” to IPsec VPN (without GRE) by “Apply
NAT Policy”.
Improved: Add the schedule option in user profile for remote dial-in VPN connection.
Improved: WAN interface can be specified for PPTP remote dial-in VPN connection.
Improved: Change default IPsec proposal DH Group from G2 to G5.
Improved: Support policy route with time schedule profile.
Improved: Support more local subnet on VPN IPsec profile.
Improved: Add Search Button in LDAP to allow users to see and select the Base
DN/Group DN
Improved: Support enforcing HTTPS management.
Improved: Support conditional DNS forwarding in LAN DNS (Type: FORWARD)
Improved: Support Root CA Signing.
Known Issue
You need to disable "Force IPsec with L2TP" options for pure L2TP tunnel in VPN and
Remote Access >> PPP General Setup.
After upgrading to firmware version 1.2.0, Vigor2960 using the new MXIC and “nand”
flash cannot downgrade to the previous firmware version We can check the flash
by CLI command "status system".
Model : Vigor2960
Hardware Version : 1.0 (M) <---------------- (M) for MXIC Flash
Hardware Version : 1.0 <---------------- none for the original Samsung Flash
Please email to to get the special firmware if you want to
downgrade to the previous firmware version.
HA configuration is not compatible. Firmware version 1.2.0 only supports one HA profile
while the previous firmware version supports 3. The primary/ secondary role field is
removed in the new firmware version also. A user will need to reconfigure HA settings.


文章: 5875
註冊時間: 週五 12月 8日, 2006年 11:10 am
來自: 台中
送出感謝: 16
擁有感謝: 0 次

回到 Draytek 軔體更新討論區


正在瀏覽這個版面的使用者:沒有註冊會員 和 1 位訪客