VigorAP900 v1.2.0 Release

版主: david

VigorAP900 v1.2.0 Release

文章門神 » 週五 1月 20日, 2017年 9:51 am

Release Note for VigorAP 900
Firmware Version:
1.2.0
Release Type:
Critical
- Upgrade recommended immediately
Release Date:
January 3, 2017
Applied Models:
VigorAP 900
VigorAP 900, the concurrent dual band wireless
(2.4G/5G) access point, offers high-speed data
transmission. With this high cost-efficiency Vi
gorAP 900, computers and wireless devices which
are compatible with 802.11n/802.11a can connect to
existing wired Ethernet network via this
VigorAP 900, at the speed of 300Mbps. Easy instal
l procedure allows users to setup a network
environment in very short time - within minutes,
even inexperienced users. Also, VigorAP900 is a
Power over Ethernet Powered De
vice which adopts the technology of PoE for offering power
supply and transmitting data through the Ethernet cable.
New Features

Add Wi-Fi interference monito
r mechanism (Diagnostics>>Inter
ference Monitor) for all
wireless channels.

Support Data Flow Monitor.

Support Diagnostics>>Station Airtime,
Diagnostics>>Station Traffic Graph,
Diagnostics>>Station Link Speed for Airtime Fairness diagnosis.
Improvement

Improved: Security improvements includi
ng one or more considered critical.

Improved: Improve AP discovery.

Improved: Simplify Quick Start Wizard for network connection.

Improved: Move some settings (e.g, MA
C Clone, Tx Power..) from Wireless
LAN>>General Setup to Wirele
ss LAN>>Advanced Setting.

Improved: Support Auto Channel Filtered Out
List (Wireless LAN>>Advanced Settings
and Wireless LAN>>General Setup). The select
ed wireless channels
will be discarded if
Auto is selected as Channel selection mode.

Improved: Vendor name can be seen in the
tab of Neighbor, Wireless LAN >>Station List.

Improved: Support LED enab
le/disable feature.

Improved: Wireless channel with the least in
terference can be seen and recommended on
Wireless LAN>>AP Discovery Statistics.

Improved: Value for Key Renewal Interval is
configured as “3600” in default for all
- 2 -
SSIDs.

Improved: Data display in Diagnostics>>Station Statistics.

Corrected: Title error (WPA2/802.1x) occurred
in Fast Roaming web user interface.

Corrected: Query DNS for pool.ntp.
org every 10 seconds when staying at Time and Date
page.

Corrected: Unable to apply wireless channe
l (8~11) configuration from Central AP
Management.

Corrected: Limit Client could not be “Disable
” simultaneously when By Traffic option is
selected for Load Balance in VigorAPM and apply to VigorAP 900.

Corrected: Schedule was not working
with customer's configuration.

Corrected: No Web UI access to RADIUS
Setting>>RADIUS Server after adding 7
RADIUS users:

Corrected: VigorAP default VLAN tag paramete
r could not be configured via VigorACS.:

Corrected: “Clear” link did not work
in Central AP Management>>APM Log.
Known Issue

None
Notes
Modifications

None
ps:急件請直接電洽
技術問題請優先洽詢 help@ublink.org

如果我們的回答您真的看不懂
請將設備的問題和IP
以及管理者的ID/Password
Mail到help@ublink.org
電話溝通讓工程師直接登入IP查看

如有其它問題,歡迎與我聯繫,謝謝您。
04-2260-5121(LineID:0932976167)
門神JanusLin
skype:janus-lin
FB:https://www.facebook.com/ublinknetwork
圖檔
頭像
門神
 
文章: 5824
註冊時間: 週五 12月 8日, 2006年 11:10 am
來自: 台中
送出感謝: 16
擁有感謝: 0 次

回到 Draytek 軔體更新討論區

誰在線上

正在瀏覽這個版面的使用者:沒有註冊會員 和 5 位訪客