Vigor2960 v1.2.1 Release
發表於 : 週四 8月 18日, 2016年 3:16 pmNO:AP1101-2 V.1
Release Note for Vigor2960
Firmware Version: 1.2.1
Release Date: August 5, 2016
Applied Models:
Vigor2960 Series
Vigor2960, a firewall broadband router with dual-WAN interface, can connect to
xDSL/cable/VDSL2/Ethernet FTTx. The dual-W
AN and 4-port gigabit LAN switch facilitates
unified communication applications in busines
s CO/remote site to handle large data from
subscribed fatter pipe. The stat
e-of-art routing feature, VPN
security, and Dual-WAN provide
integrated benefits for profe
ssional users and small offices.
Due to the firmware size limitation, for devices
using firmware version 1.0.5 or earlier, it is
suggested to upgrade to firmware version 1.0.7.1 first before upgrading to version 1.0.9 or
later.
New Features
Support Germany Language for web user interface.
Improvement
Improved: Support Session-based Load Bala
nce Mode which can improve speed test
result (
Routing >> Default Route
).
Improved: Support packet monitor which can do packet capture (
Dataflow Monitor >>
Packet Monitor
).
Improved: Improve NAT efficiency to s
upport more concurrent access and reduce CPU
loading.
Improved: Add auto DDoS defense func
tion to avoid CPU busy when flooding.
Improved: SSL VPN supports Idle Timeout and Reconnect.
Improved: Allow a user to select WCF Qu
ery Server on web user interface.
Improved: Support Generate Local Certificate.
Improved: Support UML290 4G dongle.
Improved: Update APP Signature for IM
-Google Hangouts, Protocol-DNS, HTTP,
SSL/TLS, Tunnel-UltraSurf, VoIP
-RC, and WebHD-HTTP_Upload.
Corrected: Fixed TCP/IP SYN+FIN
packet filtering weakness.
Corrected: Response time of the web page wa
s slow down when a lot of profiles (e.g.,
User Profile, VPN profile, IP objects, and etc.,)
to be displayed or processed on web page.
Known Issue
You need to disable "Force IPsec with
L2TP" options for pure L2TP tunnel in
VPN and
Remote Access >> PPP General Setup
.
After upgrading to firmware version 1.2.0,
Vigor2960 using the new MXIC and “nand”
flash cannot downgrade to the previous firm
ware version 1.1.0.2. We can check the flash
by CLI command "status system".
Model : Vigor2960
Hardware Version : 1.0 (M) <----
------------ (M) fo
r MXIC Flash
Hardware Version : 1.0 <
---------------- none
for the original Samsung Flash
Please email to support@draytek.com to ge
t the special firmware if you want to
downgrade to the previous firmware version.
HA configuration is not compatible. Firmwa
re version 1.2.0 only supports one HA profile
while the previous firmware version supports
3. The primary/ secondary role field is
removed in the new firmware version also. A user will need to reconfigure HA settings.
Notes
Modifications
None
Release Note for Vigor2960
Firmware Version: 1.2.1
Release Date: August 5, 2016
Applied Models:
Vigor2960 Series
Vigor2960, a firewall broadband router with dual-WAN interface, can connect to
xDSL/cable/VDSL2/Ethernet FTTx. The dual-W
AN and 4-port gigabit LAN switch facilitates
unified communication applications in busines
s CO/remote site to handle large data from
subscribed fatter pipe. The stat
e-of-art routing feature, VPN
security, and Dual-WAN provide
integrated benefits for profe
ssional users and small offices.
Due to the firmware size limitation, for devices
using firmware version 1.0.5 or earlier, it is
suggested to upgrade to firmware version 1.0.7.1 first before upgrading to version 1.0.9 or
later.
New Features
Support Germany Language for web user interface.
Improvement
Improved: Support Session-based Load Bala
nce Mode which can improve speed test
result (
Routing >> Default Route
).
Improved: Support packet monitor which can do packet capture (
Dataflow Monitor >>
Packet Monitor
).
Improved: Improve NAT efficiency to s
upport more concurrent access and reduce CPU
loading.
Improved: Add auto DDoS defense func
tion to avoid CPU busy when flooding.
Improved: SSL VPN supports Idle Timeout and Reconnect.
Improved: Allow a user to select WCF Qu
ery Server on web user interface.
Improved: Support Generate Local Certificate.
Improved: Support UML290 4G dongle.
Improved: Update APP Signature for IM
-Google Hangouts, Protocol-DNS, HTTP,
SSL/TLS, Tunnel-UltraSurf, VoIP
-RC, and WebHD-HTTP_Upload.
Corrected: Fixed TCP/IP SYN+FIN
packet filtering weakness.
Corrected: Response time of the web page wa
s slow down when a lot of profiles (e.g.,
User Profile, VPN profile, IP objects, and etc.,)
to be displayed or processed on web page.
Known Issue
You need to disable "Force IPsec with
L2TP" options for pure L2TP tunnel in
VPN and
Remote Access >> PPP General Setup
.
After upgrading to firmware version 1.2.0,
Vigor2960 using the new MXIC and “nand”
flash cannot downgrade to the previous firm
ware version 1.1.0.2. We can check the flash
by CLI command "status system".
Model : Vigor2960
Hardware Version : 1.0 (M) <----
------------ (M) fo
r MXIC Flash
Hardware Version : 1.0 <
---------------- none
for the original Samsung Flash
Please email to support@draytek.com to ge
t the special firmware if you want to
downgrade to the previous firmware version.
HA configuration is not compatible. Firmwa
re version 1.2.0 only supports one HA profile
while the previous firmware version supports
3. The primary/ secondary role field is
removed in the new firmware version also. A user will need to reconfigure HA settings.
Notes
Modifications
None