VigorAP900 v1.1.8 Release

版主: david

VigorAP900 v1.1.8 Release

文章門神 » 週五 6月 17日, 2016年 4:25 pm

- 1 -
Release Note for VigorAP 900
Firmware Version: 1.1.8
Release Date: May 16, 2016
Applied Models:
VigorAP 900
VigorAP 900, the concurrent dual band wireless
(2.4G/5G) access point, offers high-speed data
transmission. With this high cost-efficiency Vi
gorAP 900, computers and wireless devices which
are compatible with 802.11n/802.11a can connect to
existing wired Ethernet network via this
VigorAP 900, at the speed of 300Mbps. Easy instal
l procedure allows users to setup a network
environment in very short time - within minutes,
even inexperienced users. Also, VigorAP900 is a
Power over Ethernet Powered De
vice which adopts the technology of PoE for offering power
supply and transmitting data through the Ethernet cable.
New Features

Airtime Fairness can work with QoS by combining feature of WMM

Support SNMPv3.

Add RSSI Threshold option in Central AP
Management >> Status of Settings.
Improvement

Corrected: Session validation method improved in Web UI.

Corrected: Airtime Fairness perfor
mance issue under interference.

Corrected: RADIUS Server
backup file issue.

Corrected: Fixed the error occurred (WiFi up /down) in Schedule settings.

Corrected: DHCP problem with Universal Repeater Mode.

Corrected: Unable to display correct WiFi C
ountry Code for certain area VigorAP located.

Corrected: LAN ports disconnected when a simple schedule setup was performed.

Corrected: Change the word MHZ into
MHz in Wireless LAN>>General Setup.

Corrected: SSID1 Auto Adjustment was enabled. Then configured upload and download
bandwidth with values greater than the
limit for SSID1 Wireless LAN>>Bandwidth
Management. As a result, a warning message
dialog appeared indi
cating configuration
error on SSID2 instead of SSID1.

Corrected: Mobile Device Management could
not detect the model name, OS correctly
for certain device (e.g., notebook).
- 2 -

Corrected: When Use internal RADIUS Server was enabled on RADIUS Server Setup
dialog (under Wireless LAN >> Security), the fi
elds of IP Address and Shared Secret
were not allowed for entering values normally.

Corrected: Airplay did not work
over Universal Repeater link.

Corrected: The active channel number specifie
d by AutoSelect did no
t appear on the drop
down menu of Channel in Wirele
ss LAN (5GHz) >> General Setup.

Corrected: After the username and passwor
d authenticated by RADIUS server, if 802.1x
security mode for wireless LAN 5G was
changed, the network connection would be
disconnected. External/internal RADIUS server
had to be enabled again to regain the
network connection.

Improved: Support backup configurati
on file with password protected

Improved: Support Trust Server Address
(DHCP) option in LAN>>General Setup.

Improved: Support Temperature Graph in Cent
ral AP Management>>Temperature Sensor.

Improved: Add Vendor name field in Wireless LAN>>Station List.

Improved: WiFi Auto Channel stat
us display (text change) issue.

Improved: Add legend for RADIUS Server >> Session Timeout.

Improved: Modify the graph color correspondi
ng to the icon color displayed in Mobile
Device Management >>Statistics.

Improved: Offer a warning message to ask th
e user changing default admin password.
Known Issue

None
Notes
Modifications

None
ps:求助順序請直接
(1)電洽 04-2260-5121 / 0963-685-121
(2)http://line.naver.jp/ti/p/%40xat.0000132120.jmw 技術客服 LINE
(3)問題請優先洽詢 help@ublink.org
Telegram 頻道 Channel https://t.me/ublinkorg 韌體更新發佈
其他線上聯絡方式,http://www.ublink.org/index.php/contact
頭像
門神
 
文章: 6265
註冊時間: 週五 12月 8日, 2006年 11:10 am
來自: 台中
送出感謝: 16
擁有感謝: 0 次

回到 Draytek 軔體更新討論區

誰在線上

正在瀏覽這個版面的使用者:沒有註冊會員 和 19 位訪客

cron