Vigor2860 v3.8.2.2 Release

版主: david

Vigor2860 v3.8.2.2 Release

文章門神 » 週四 3月 3日, 2016年 3:26 pm

- 1 -
NO:AP1101-2 V.1
Release Note for Vigor2860 Series
Firmware Version: 3.8.2.2
Release Date: February 22, 2016
Applied Models:
Vigor2860/Vigor2860n/Vigor2860n-plus/Vigor2860Vn-plus/
Vigor2860ac/Vigor2860Vac/Vigor2860L/Vigor2860Ln
Vigor2860 series is a
VDSL2
router with
multi-subnet
for secure and efficient workgroup
management. It integrates IP layer QoS, NAT sess
ion/bandwidth management to help users control
works well with large bandwidth.
File and Modem Code
Note:
For DSL models, there will be four
folders: STD, VECTOR1, VECTOR2 and
VECTOR3. The files in VECTOR named fo
lder implement a new DSL driver, which
supports G.Vectoring on VDSL. If you're us
ing a VDSL line, VECTOR named firmware
may bring out better performance; however,
please consult your ISP to check if
G.Vectoring is required. We also provide
two versions of modem codes to avoid the
interoperability issue. You could just
try the other one if the one you use cannot
synchronize or get the sp
eed that you expected.
Available modem codes for Annex A/Annex B are displayed as follows:
For Annex A Model,

"Vigor2860_v3.8.2.2-00_en.zip" is used for modem code 548006_544401 &
560816_552011

"Vigor2860_v3.8.2.2-01v_en.zip" is used
for modem code 567517_562301 &
566207_562101 (recommended by SEG)

"Vigor2860_v3.8.2.2-02v_en.zip" is used
for modem code 574307_571801 &
573807_571701

"Vigor2860_v3.8.2.2-03v_en.zip" is used
for modem code 576d17_572801 &
574307_571801
For Annex B Model,

" Vigor2860_v3.8.2.2-00_en.zip " is used for modem code 548006_544512 &
551716_553312

"Vigor2860_v3.8.2.2-01v_en.zip" is used
for modem code 565607_567002 &
565606_567002
- 2 -

"Vigor2860_v3.8.2.2-02v_en.zip" is used
for modem code 73307_571502 &
565607_567002

"Vigor2860_v3.8.2.2-03v_en.zip" is used
for modem code 573307_571c02 &
565607_567002
New Features

Support X.509 Certificate with
length more than 2048 bytes.

Support to bind SSL VPN Port by WAN1/WAN2.

Support to force the user to click on a butt
on to proceed on Web Portal Message mode.

Support "Fragment Length" and "RTS/CTS Thre
shold" configurations for wireless 2.4G
& 5G.

Support 2048-bit DH for SSH connection.

Support APP QoS.

Support to check/download the latest
release firmware via router web.
Improvement

Improved: Wireless 2.4G interference mitigation.

Improved: Maximum characters
of DynDNS password is 64.

Improved: Disable wireless but
ton function via VigorACS SI.

Improved: Support ZTE MF730M & Huawei K3520 USB dongle.

Improved: When selecting DFS channels, the
router gives some indications to user.

Corrected: PCs and router's LAN could not
obtain IPv6 addresses after WAN connection
interruption.

Corrected: Firewall blocked all LAN to WAN traffic when no IP Object with MAC
Address Type was selected.

Corrected: SSL VPN sometimes dropped after
a period of time w
ith SmartVPN 4.3.3.

Corrected: Redirected webpage showed abnorma
lly after setting Web Portal, and webpage
wouldn't resize by different device.

Corrected: Wireless Wizard didn't work.

Corrected: Failed to access Inte
rnet, when packet was with DSCP and VLAN tag at the
same time.

Corrected: Character "@" could not be us
ed in Username of User Profiles.

Corrected: Disabling NAT Port Redirecting
Rule would clear the Protocol entry.

Corrected: DDNS did not work, when DDNS pa
ssword was set with special characters
@#$%.

Corrected: Customized DDNS Authentication via HTTPS failed.

Corrected: When ping LAN ip in "Ping Dia
gnosis" web page, the router would crash.

Corrected: TCP/IP SYN+FIN Packet Filtering Weakness.
ps:求助順序請直接
(1)電洽 04-2260-5121 / 0963-685-121
(2)http://line.naver.jp/ti/p/%40xat.0000132120.jmw 技術客服 LINE
(3)問題請優先洽詢 help@ublink.org
Telegram 頻道 Channel https://t.me/ublinkorg 韌體更新發佈
其他線上聯絡方式,http://www.ublink.org/index.php/contact
頭像
門神
 
文章: 6265
註冊時間: 週五 12月 8日, 2006年 11:10 am
來自: 台中
送出感謝: 16
擁有感謝: 0 次

回到 Draytek 軔體更新討論區

誰在線上

正在瀏覽這個版面的使用者:沒有註冊會員 和 19 位訪客

cron