Vigor2960 v1.2.0 Release note

版主: david

Vigor2960 v1.2.0 Release note

文章門神 » 週二 12月 8日, 2015年 4:55 pm

- 1 -
NO:AP1101-2 V.1
Release Note for Vigor2960
Firmware Version: 1.2.0
Release Date: November 18, 2015
Applied Models:
Vigor2960, Vigor2960F
Vigor2960, a firewall broadband router with dual-WAN interface, can connect to
xDSL/cable/VDSL2/Ethernet FTTx. The dual-WAN and 4-port gigabit LAN switch facilitates
unified communication applications in business CO/remote site to handle large data from
subscribed fatter pipe. The state-of-art routing feature, VPN security, and Dual-WAN provide
integrated benefits for professional users and small offices.
Due to the firmware size limitation, for devices using firmware version 1.0.5 or earlier, it is
suggested to upgrade to firmware version 1.0.7.1 first before upgrading to version 1.0.9 or
later.
New Features
Support SMB Server in "USB Application".
Support MAC/Vendor Object in "IP Filter".
Support config analysis in "Configuration Backup".
Support Auto Firmware Patch in "Firmware Upgrade".
Add SMS Authentication for Web Portal Setup.
Add block Mobile Device function for Web Portal Setup.
Add Customize Login Image in Access Control Page.
Improvement
Improved: Improve the design of HA (High Availability) function.
Improved: Support to display service usage on Data Flow Monitor.
Improved: Display of Firewall summary and Syslog.
Improved: Support matched counter display for Firewall.
Improved: Support "esendex" SMS provider and Custom SMS Provider.
Improved: Support clear session when scheduler ON.
- 2 -
Improved: Support SHA2 SHA-256 for VPN connection.
Improved: Support CPU, Memory, Traffic Tx/Rx usage in Notification Object.
Improved: Support to display indirect connected LAN Hosts in Data Flow Monitor.
Improved: Support separate SSL VPN port.
Improved: Enhance WCF https filtering.
Improved: Support suffix type in IPv6 object.
Improved: Support to add IP Object in "Diagnostic >> ARP Cache Table" page.
Improved: Support Specify Remote IP for Remote Dial-in VPN Client.
Improved: Support PPTP Remote Dial in Clients for Bandwidth Limit.
Improved: Allow management via specified WAN interface.
Improved: Change the SOA Serial Format for DNS server (Inbound Load Balance).
Improved: Support for 4G Dongle Huawei E3372.
Improved: Support to block "Spotify" in Application Filter.
Improved: Increase maximum number of External Device to 200.
Fixed: Traffic graph was not accurate for LAN.
Fixed: QoS class was not displayed in Sessions Table.
Known Issue
You need to disable "Force IPsec with L2TP" options for pure L2TP tunnel in VPN and
Remote Access >> PPP General Setup.
After upgrading to firmware version 1.2.0, Vigor2960 using the new MXIC and flash
cannot downgrade to the previous firmware version 1.1.0.2. We can check the flash by
CLI command "status system".
Model : Vigor2960
Hardware Version : 1.0 (M) <---------------- (M) for MXIC Flash
Hardware Version : 1.0 <---------------- none for the original Samsung Flash
We will put the specific firmware to our web/ ftp site if customer requires downgrade to
the previous firmware version.
HA configuration is not compatible. Firmware version 1.2.0 only supports one HA profile
while the previous firmware version supports 3. The primary/ secondary role field is
removed in the new firmware version also. A user will need to reconfigure HA settings.
Notes
Modifications
None
ps:求助順序請直接
(1)電洽 04-2260-5121 / 0963-685-121
(2)http://line.naver.jp/ti/p/%40xat.0000132120.jmw 技術客服 LINE
(3)問題請優先洽詢 help@ublink.org
Telegram 頻道 Channel https://t.me/ublinkorg 韌體更新發佈
其他線上聯絡方式,http://www.ublink.org/index.php/contact
頭像
門神
 
文章: 6265
註冊時間: 週五 12月 8日, 2006年 11:10 am
來自: 台中
送出感謝: 16
擁有感謝: 0 次

回到 Draytek 軔體更新討論區

誰在線上

正在瀏覽這個版面的使用者:沒有註冊會員 和 16 位訪客

cron