Vigor2860 v3.8.1 Release Note

版主: david

Vigor2860 v3.8.1 Release Note

文章門神 » 週六 10月 24日, 2015年 7:48 am

- 1 -
NO:AP1101-2 V.1
Release Note for Vigor2860 Series
Firmware Version: 3.8.1
Release Date: September 21, 2015
Applied Models:
Vigor2860/Vigor2860n/Vigor2860n-plus/Vigor2860Vn-plus/
Vigor2860ac/Vigor2860Vac
Vigor2860 series is a VDSL2 router with multi-subnet for secure and efficient workgroup
management. It integrates IP layer QoS, NAT session/bandwidth management to help users control
works well with large bandwidth.
File and Modem Code
Note: For DSL models, there will be three folders: STD, VECTOR1 and VECTOR2.
The files in VECTOR named folder implement a new DSL driver, which supports
G.Vectoring on VDSL. If you're using a VDSL line, VECTOR named firmware may
bring out better performance; however, please consult your ISP to check if G.Vectoring
is required. We also provide two versions of modem codes to avoid the interoperability
issue. You could just try the other one if the one you use cannot synchronize or get the
speed that you expected.
Available modem codes for Annex A/Annex B are displayed as follows:
For Annex A Model,
 "Vigor2860_v3.8.1_STD.zip" is used for modem code 548006_544401 &
560816_552011
 "Vigor2860_v3.8.1_VECTOR1.zip" is used for modem code 567517_562301 &
566f07_562701 (recommended by SEG)
 "Vigor2860_v3.8.1_VECTOR2.zip" is used for modem code 574307_571801 &
573807_571701
For Annex B Model,
 "Vigor2860_v3.8.1_STD.zip" is used for modem code 548006_544512 &
551716_5533126
 "Vigor2860_v3.8.1_VECTOR1.zip" is used for modem code 565607_567002 &
565606_567002
 "Vigor2860_v3.8.1_VECTOR2.zip" is used for modem code 573307_571c02 &
565607_567002
- 2 -
New Features
Support DrayTek's own SMB protocol stack.
Support internal RADIUS server. (Applications >> RADIUS/TACACS+ web)
Support Switch Management. (Dashboard switch management icon)
Support IPv6 for all LAN & WAN interfaces.
Support HTTPs redirect for web portal. (LAN >> Web Portal Setup web)
Support Dashboard for Central AP Management. (Central AP Management >> Dashboard
web)
Support SMS notification for Central VPN Management (CVM). (Object Settings >>
Notification Object web)
Support LAN to LAN (SSL VPN) dial-up for Central VPN Management (CVM). (CVM
>> VPN Management web)
Support to upgrade multiple firmwares simultaneously for Central AP Management.
(CAM).
Support Tacas+ for VPN authentication. (VPN and Remote Access >> PPP General Setup
web)
Support open port to the host in remote VPN.
Support WAN Bridge with Firewall applied. (WAN >> Internet Access Static or Dynamic
IP web)
Support route policy diagnostics web. (Load-Balance/Route Policy >> Diagnose web)
Wireless 2.4G Station mode can be WAN2 connection. (WAN >> General Setup WAN2
Physical Mode option)
Improvement
Improved: Ping Detect Improvement for WAN Connection Detection.
Improved: All the DHCP clients can be displayed in DHCP Table.
Corrected: URL filter blocked HTTPS websites even if their URL didn't match the
keyword.
Corrected: QoS status didn't show traffic and graph after disabling firewall data filter.
Corrected: A PC couldn't connect to Internet with IPv6 when a router used WAN DHCPv6
or 6rd connection type.
Corrected: LAN to LAN connection could not be re-established for CPE by VigorACS SI
(VPN wizard), after disconnected VPN by VigorACS SI.
Corrected: IP Filter telnet command could not set Service Type Protocol to UDP or TCP.
- 3 -
Known Issue
Vigor router will fail to send multiple papers/files from Phone1 to Phone 2 with FAX
mechanism.
ps:求助順序請直接
(1)電洽 04-2260-5121 / 0963-685-121
(2)http://line.naver.jp/ti/p/%40xat.0000132120.jmw 技術客服 LINE
(3)問題請優先洽詢 help@ublink.org
Telegram 頻道 Channel https://t.me/ublinkorg 韌體更新發佈
其他線上聯絡方式,http://www.ublink.org/index.php/contact
頭像
門神
 
文章: 6265
註冊時間: 週五 12月 8日, 2006年 11:10 am
來自: 台中
送出感謝: 16
擁有感謝: 0 次

回到 Draytek 軔體更新討論區

誰在線上

正在瀏覽這個版面的使用者:沒有註冊會員 和 19 位訪客

cron