Vigor2960 v1.1.0 Release 這個版本支援 SSL VPN (LAN to LAN) 通道模式 co
發表於 : 週三 6月 24日, 2015年 3:32 pmVigor2960 v1.1.0 Release 這個版本支援 SSL VPN (LAN to LAN) 通道模式 connection up to 300Mbps
- 1 -
NO:AP1101-2 V.1
Release Note for Vigor2960
Firmware Version: 1.1.0
Release Date: June 10, 2015
Applied Models:
Vigor2960, Vigor2960F
Vigor2960, a firewall broadband router with dual-WAN interface, can connect to
xDSL/cable/VDSL2/Ethernet FTTx. The dual-W
AN and 4-port gigabit LAN switch facilitates
unified communication applications in busines
s CO/remote site to handle large data from
subscribed fatter pipe. The stat
e-of-art routing feature, VPN
security, and Dual-WAN provide
integrated benefits for profe
ssional users and small offices.
Due to the firmware size limitation, for devices
using firmware version 1.0.5 or earlier, it is
suggested to upgrade to firmware version 1.0.7.1 first before upgrading to version 1.0.9 or
later.
New Features
Support SSL VPN LAN to LAN connection up
to 300Mbps (only connecting to DrayTek
router with SSL L
AN to LAN function).
Support internal RADIUS server in
User Management>>RADIUS
.
Support
APP Support List
in
Objects Settings>>APP Support List
.
Add auto/manual
APP Signature Upgrade
setting page in
System Maintenance>>APP
Signature Upgrade
.
In
System Maintenance>>Access Control
:
Add
Validation Code
in
Access Control
tab to improve web admin security;
Add
Fail to Ban
setting page to block abnormal failed login;
Add
Access Barrier
setting page to protect local se
rvice from brute force attack.
Add
Switch Rate Limit
setting page in
Firewall >> Dos Defense.
Add
NAT >> Connection Timeout
for changing the session timeout.
Improvement
Improved: Support firmwa
re upgrade notification.
- 2 -
Improved: Add auto DDoS protection in coprocessor.
Improved: Support Multicast via VPN.
Improved: Add SSL VPN settings page in
VPN and Remote Access >> PPP General
Setup
.
Improved: Support more remote subnet for PPTP Dial-In VPN profile.
Improved: Support LDAP/RADIUS auth
entication for SSL Proxy login.
Improved: In
Routing>>Policy Route
,
Add a new option
Priority
for more flexible routing;
Support country object as destination;
Support failover when target IP ping failed or succeeded.
Improved: In
LAN>>LAN DNS
, support Specified LANs, wild-card string and CNAME
record.
Improved: Support upload HTML file as bulletin message in
User Management>>Web
Portal>>Portal Page Setup
.
Improved: Add
Diagnostics >> MAC Address Table
.
Improved: Add
Diagnostics >> User Status
for showing PPPoE/Web Portal/VPN/SSL
Proxy users in a single page.
Improved: Add
Packet Inspection
settings in
Firewall >> Filter Setup >> Default Policy.
Improved: Add wake by profile in
Applications>>Wake on LAN
.
Improved: Support multiple choice in
User Management>>User Profile>>Apply All
.
Improved: Add port statistics in
Diagnostics >> Traffic Statistics
.
Improved: Add Session information in
Diagnostics>>Traffic graph
.
Improved: Add vendor information in
Diagnostics>>ARP Cache Table
.
Improved: Add daily and period time
out settings for Web Portal (in
User
Management>>Web Portal>>General Setup
).
Improved: Support to apply to specific VLANs in
LAN>>Bind IP to MAC
.
Improved: Support VPN routing
for GRE over IPsec tunnel.
Improved: Support Keep VPN Setting in Central
VPN Management>>CPE Management
.
Improved: Support time interval set
ting for USB temperature sensor (in
USB
Application>>Temperature Sensor>>General Setup
).
Corrected: Support DNS server located in LAN.
Corrected: Unable to pass traffic from LAN to PPPoE clients.
Improved: Improve web page for WCF categories selection.
Improved: Support display matc
hing counter for IP Filter.
Known Issue
You need to disable "Force IPsec with
L2TP" options for pure L2TP tunnel in
VPN and
Remote Access >> PPP General Setup
.
- 1 -
NO:AP1101-2 V.1
Release Note for Vigor2960
Firmware Version: 1.1.0
Release Date: June 10, 2015
Applied Models:
Vigor2960, Vigor2960F
Vigor2960, a firewall broadband router with dual-WAN interface, can connect to
xDSL/cable/VDSL2/Ethernet FTTx. The dual-W
AN and 4-port gigabit LAN switch facilitates
unified communication applications in busines
s CO/remote site to handle large data from
subscribed fatter pipe. The stat
e-of-art routing feature, VPN
security, and Dual-WAN provide
integrated benefits for profe
ssional users and small offices.
Due to the firmware size limitation, for devices
using firmware version 1.0.5 or earlier, it is
suggested to upgrade to firmware version 1.0.7.1 first before upgrading to version 1.0.9 or
later.
New Features
Support SSL VPN LAN to LAN connection up
to 300Mbps (only connecting to DrayTek
router with SSL L
AN to LAN function).
Support internal RADIUS server in
User Management>>RADIUS
.
Support
APP Support List
in
Objects Settings>>APP Support List
.
Add auto/manual
APP Signature Upgrade
setting page in
System Maintenance>>APP
Signature Upgrade
.
In
System Maintenance>>Access Control
:
Add
Validation Code
in
Access Control
tab to improve web admin security;
Add
Fail to Ban
setting page to block abnormal failed login;
Add
Access Barrier
setting page to protect local se
rvice from brute force attack.
Add
Switch Rate Limit
setting page in
Firewall >> Dos Defense.
Add
NAT >> Connection Timeout
for changing the session timeout.
Improvement
Improved: Support firmwa
re upgrade notification.
- 2 -
Improved: Add auto DDoS protection in coprocessor.
Improved: Support Multicast via VPN.
Improved: Add SSL VPN settings page in
VPN and Remote Access >> PPP General
Setup
.
Improved: Support more remote subnet for PPTP Dial-In VPN profile.
Improved: Support LDAP/RADIUS auth
entication for SSL Proxy login.
Improved: In
Routing>>Policy Route
,
Add a new option
Priority
for more flexible routing;
Support country object as destination;
Support failover when target IP ping failed or succeeded.
Improved: In
LAN>>LAN DNS
, support Specified LANs, wild-card string and CNAME
record.
Improved: Support upload HTML file as bulletin message in
User Management>>Web
Portal>>Portal Page Setup
.
Improved: Add
Diagnostics >> MAC Address Table
.
Improved: Add
Diagnostics >> User Status
for showing PPPoE/Web Portal/VPN/SSL
Proxy users in a single page.
Improved: Add
Packet Inspection
settings in
Firewall >> Filter Setup >> Default Policy.
Improved: Add wake by profile in
Applications>>Wake on LAN
.
Improved: Support multiple choice in
User Management>>User Profile>>Apply All
.
Improved: Add port statistics in
Diagnostics >> Traffic Statistics
.
Improved: Add Session information in
Diagnostics>>Traffic graph
.
Improved: Add vendor information in
Diagnostics>>ARP Cache Table
.
Improved: Add daily and period time
out settings for Web Portal (in
User
Management>>Web Portal>>General Setup
).
Improved: Support to apply to specific VLANs in
LAN>>Bind IP to MAC
.
Improved: Support VPN routing
for GRE over IPsec tunnel.
Improved: Support Keep VPN Setting in Central
VPN Management>>CPE Management
.
Improved: Support time interval set
ting for USB temperature sensor (in
USB
Application>>Temperature Sensor>>General Setup
).
Corrected: Support DNS server located in LAN.
Corrected: Unable to pass traffic from LAN to PPPoE clients.
Improved: Improve web page for WCF categories selection.
Improved: Support display matc
hing counter for IP Filter.
Known Issue
You need to disable "Force IPsec with
L2TP" options for pure L2TP tunnel in
VPN and
Remote Access >> PPP General Setup
.