Vigor2925 v3.8.0 Release

版主: david

Vigor2925 v3.8.0 Release

文章門神 » 週日 4月 26日, 2015年 2:15 pm

- 1 -
NO:AP1101-2 V.1
Release Note for Vigor2925 Series
Firmware Version: 3.8.0
Release Date: April 17, 2015
Applied Models:
Vigor2925, Vigor2925n, Vigor2925n-plus, Vigor2925Vn-plus, Vigor2925F,
Vigor2925Fn
Vigor2925 series is a broadband router which integrates IP layer QoS, NAT session/bandwidth
management to help users control works well with large bandwidth. The state-of-art routing feature,
VPN security, and Dual-WAN provide integrated benefits for professional users and small offices.
New Features
Support IPv6 for all interfaces.
Improvement
Improved: Improvement for SMB file sharing and add client support list.
Improved: Support baby jumbo Ethernet frame/ MTU 1500 in PPPoE/PPPoA.
Improved: Support that users can enable/disable VoIP service by web interface.
Improved: WAN budget can be set and displayed on the page of Object
Settings>>Notification Object.
Improved: Modify "more options" for Load-Balance/ Route Policy.
Improved: Modify the name of Start/End Port with Dest Port Start/ Dest Port End in the
page of Hardware Acceleration.
Improved: Add SNMP setting to TR-069 so they can be set through VigorACS.
Improved: Add web user interface protection to restrict PING to keep alive for IPsec Only
for LAN to LAN profile.
Improved: Vigor router sends DHCP Discover syslog only when WAN port is physically
up.
Improved: Add TR-069 parameter, IPv6 access list.
Improved: Change web server session ID generating method to improve security.
Improved: SSL3 now disabled in favour of TLS by default for SSL tunnels and web
management.
Improved: Modify that only limited access to WLAN (5GHz) is allowed in user mode.
Improved: An issue of Route Policy with VPN Trunk. (Traffic configured to go via VPN2
- 2 -
will pass through VPN1 when VPN2 is down).
Improved: PVC/VLAN wording was not correct on IGMP WUI.
Improved: Add notes on the page of User Management>>User Online Status.
Improved: Remove "Select All" and "Clear All" buttons for BPjM. (CSM>>Web Content
Filter Profile)
Corrected: Multicast via VPN did not work.
Corrected: Fixed that DNS filter did not check profile index correctly
Corrected: Secure phone option was missing on Phone Book web page.
Corrected: Quick Start Wizard did not support USB Modem (DHCP mode).
Corrected: After enabling SNMP, the switch would be blocked by CSM.
Corrected: Unable to change access control for wireless LAN from White List to Black
List by VigorACS SI.
Corrected: PCs on LAN can not access to User Management web login page when
“Allow management from LAN” is disabled.
Corrected: Unable to display TR-069 parameter by using web console (telnet works fine).
Corrected: The Private IP Port information should not be displayed in WAN IP/Port
entries when NAT status was checked by using telnet command, srv nat showall.
Known Issue
The WAN port can not work well with Alcatel I-040G device. The quick solution is to
add another switch between Vigor2925 and Alcatel I-040G.
Notes
Modifications
None
ps:求助順序請直接
(1)電洽 04-2260-5121 / 0963-685-121
(2)http://line.naver.jp/ti/p/%40xat.0000132120.jmw 技術客服 LINE
(3)問題請優先洽詢 help@ublink.org
Telegram 頻道 Channel https://t.me/ublinkorg 韌體更新發佈
其他線上聯絡方式,http://www.ublink.org/index.php/contact
頭像
門神
 
文章: 6265
註冊時間: 週五 12月 8日, 2006年 11:10 am
來自: 台中
送出感謝: 16
擁有感謝: 0 次

回到 Draytek 軔體更新討論區

誰在線上

正在瀏覽這個版面的使用者:Google [Bot] 和 15 位訪客

cron