VigorAP900 v1.1.5 Release Note

版主: david

VigorAP900 v1.1.5 Release Note

文章門神 » 週三 1月 7日, 2015年 9:48 am

- 1 -
Release Note for VigorAP 900
Firmware Version: 1.1.5
Release Date: December 24, 2014
Applied Models:
VigorAP 900
VigorAP 900, the concurrent dual band wireless
(2.4G/5G) access point, offers high-speed data
transmission. With this high cost-efficiency Vi
gorAP 900, computers and wireless devices which
are compatible with 802.11n/802.11a can connect to
existing wired Ethernet network via this
VigorAP 900, at the speed of 300Mbps. Easy instal
l procedure allows users to setup a network
environment in very short time - within minutes,
even inexperienced users. Also, VigorAP900 is a
Power over Ethernet Powered De
vice which adopts the technology of PoE for offering power
supply and transmitting data through the Ethernet cable.
New Features

Support Air-time Fairness for WLAN.

Add LAN>>Port Control.

Add WLAN>>Station Control for 2.4GHz/5GHz.

Add
Wireless LAN>>Status
for debug only.
Improvement

Improved: Add the option of
Disable LEDs
in
System Maintenance>>Management
.

Improved: Add the option of
Mail Alert
in
Applications>>Temperature Sensor Setting
for temperature sensor alarms.

Improved: Add WLAN on/off option for enablin
g/disabling the hardwa
re button function.

Improved: Wireless stability in multi-client environment.

Improved: Add a filed of hostname in
Wireless LAN>>Station List.

Improved: Modify the web user interface for
Application>>Schedule
(by adding the
field of Action).

Improved: Add a note to explain Central AP
Management doesn't work for LAN-B.

Corrected: Problems with Universal Repeater
mode when wireless client connects using
DHCP.

Corrected: The DHCP mode did not show de
fault gateway IP address could not be
displayed normally under DHCP mode.
- 2 -

Corrected: Can't enable WPA2/802.1x (R
adius) mode for SSID3 and SSID4

Corrected: The change of HTTP port number on
System Maintenance>>Management
could not be activated via automatic
system reboot after configuration.

Improved: Add
IGMP snooping
option in
Wireless LAN>>General Setup
page

Corrected: 2.4G/5G WLAN was disabled by
schedule, but WAN LED was still on.

Improved: Hide the information for the second subnet when LAN B is disabled.
Known Issue

None
Notes
Modifications

None
ps:求助順序請直接
(1)電洽 04-2260-5121 / 0963-685-121
(2)http://line.naver.jp/ti/p/%40xat.0000132120.jmw 技術客服 LINE
(3)問題請優先洽詢 help@ublink.org
Telegram 頻道 Channel https://t.me/ublinkorg 韌體更新發佈
其他線上聯絡方式,http://www.ublink.org/index.php/contact
頭像
門神
 
文章: 6265
註冊時間: 週五 12月 8日, 2006年 11:10 am
來自: 台中
送出感謝: 16
擁有感謝: 0 次

回到 Draytek 軔體更新討論區

誰在線上

正在瀏覽這個版面的使用者:沒有註冊會員 和 20 位訪客