VigorAP900 v1.1.5 Release Note
發表於 : 週三 1月 7日, 2015年 9:48 am- 1 -
Release Note for VigorAP 900
Firmware Version: 1.1.5
Release Date: December 24, 2014
Applied Models:
VigorAP 900
VigorAP 900, the concurrent dual band wireless
(2.4G/5G) access point, offers high-speed data
transmission. With this high cost-efficiency Vi
gorAP 900, computers and wireless devices which
are compatible with 802.11n/802.11a can connect to
existing wired Ethernet network via this
VigorAP 900, at the speed of 300Mbps. Easy instal
l procedure allows users to setup a network
environment in very short time - within minutes,
even inexperienced users. Also, VigorAP900 is a
Power over Ethernet Powered De
vice which adopts the technology of PoE for offering power
supply and transmitting data through the Ethernet cable.
New Features
Support Air-time Fairness for WLAN.
Add LAN>>Port Control.
Add WLAN>>Station Control for 2.4GHz/5GHz.
Add
Wireless LAN>>Status
for debug only.
Improvement
Improved: Add the option of
Disable LEDs
in
System Maintenance>>Management
.
Improved: Add the option of
Mail Alert
in
Applications>>Temperature Sensor Setting
for temperature sensor alarms.
Improved: Add WLAN on/off option for enablin
g/disabling the hardwa
re button function.
Improved: Wireless stability in multi-client environment.
Improved: Add a filed of hostname in
Wireless LAN>>Station List.
Improved: Modify the web user interface for
Application>>Schedule
(by adding the
field of Action).
Improved: Add a note to explain Central AP
Management doesn't work for LAN-B.
Corrected: Problems with Universal Repeater
mode when wireless client connects using
DHCP.
Corrected: The DHCP mode did not show de
fault gateway IP address could not be
displayed normally under DHCP mode.
- 2 -
Corrected: Can't enable WPA2/802.1x (R
adius) mode for SSID3 and SSID4
Corrected: The change of HTTP port number on
System Maintenance>>Management
could not be activated via automatic
system reboot after configuration.
Improved: Add
IGMP snooping
option in
Wireless LAN>>General Setup
page
Corrected: 2.4G/5G WLAN was disabled by
schedule, but WAN LED was still on.
Improved: Hide the information for the second subnet when LAN B is disabled.
Known Issue
None
Notes
Modifications
None
Release Note for VigorAP 900
Firmware Version: 1.1.5
Release Date: December 24, 2014
Applied Models:
VigorAP 900
VigorAP 900, the concurrent dual band wireless
(2.4G/5G) access point, offers high-speed data
transmission. With this high cost-efficiency Vi
gorAP 900, computers and wireless devices which
are compatible with 802.11n/802.11a can connect to
existing wired Ethernet network via this
VigorAP 900, at the speed of 300Mbps. Easy instal
l procedure allows users to setup a network
environment in very short time - within minutes,
even inexperienced users. Also, VigorAP900 is a
Power over Ethernet Powered De
vice which adopts the technology of PoE for offering power
supply and transmitting data through the Ethernet cable.
New Features
Support Air-time Fairness for WLAN.
Add LAN>>Port Control.
Add WLAN>>Station Control for 2.4GHz/5GHz.
Add
Wireless LAN>>Status
for debug only.
Improvement
Improved: Add the option of
Disable LEDs
in
System Maintenance>>Management
.
Improved: Add the option of
Mail Alert
in
Applications>>Temperature Sensor Setting
for temperature sensor alarms.
Improved: Add WLAN on/off option for enablin
g/disabling the hardwa
re button function.
Improved: Wireless stability in multi-client environment.
Improved: Add a filed of hostname in
Wireless LAN>>Station List.
Improved: Modify the web user interface for
Application>>Schedule
(by adding the
field of Action).
Improved: Add a note to explain Central AP
Management doesn't work for LAN-B.
Corrected: Problems with Universal Repeater
mode when wireless client connects using
DHCP.
Corrected: The DHCP mode did not show de
fault gateway IP address could not be
displayed normally under DHCP mode.
- 2 -
Corrected: Can't enable WPA2/802.1x (R
adius) mode for SSID3 and SSID4
Corrected: The change of HTTP port number on
System Maintenance>>Management
could not be activated via automatic
system reboot after configuration.
Improved: Add
IGMP snooping
option in
Wireless LAN>>General Setup
page
Corrected: 2.4G/5G WLAN was disabled by
schedule, but WAN LED was still on.
Improved: Hide the information for the second subnet when LAN B is disabled.
Known Issue
None
Notes
Modifications
None