Vigor2925 v3.7.6 Release Note
發表於 : 週二 12月 9日, 2014年 5:18 pm- 1 -
NO:AP1101-2 V.1
Release Note for Vigor2925 Series
Firmware Version: 3.7.6
Release Date: November 20, 2014
Applied Models:
Vigor2925, Vigor2925n, Vigor2925n-plus, Vigor2925Vn-plus, Vigor2925F,
Vigor2925Fn
Vigor2925 series is a broadband r
outer which integrates IP la
yer QoS, NAT session/bandwidth
management to help users control works well with
large bandwidth. The state-
of-art routing feature,
VPN security, and Dual-WAN provide integrated bene
fits for professional us
ers and small offices.
New Features
Support higher throughput SSL VPN.
Support upgrade-able APPE signature.
Support multi-level WAN backup mechanism.
Support TACACS+ remote authentication.
Support Virtual IP Mapping for using virtua
l IPs for VPN LAN to LAN tunnel and NAT
these IPs to physical IP.
Support DNS filter object in
Firewall>>General Setup
.
Support configuration backup protection in
Maintenance>>Configuration Backup
.
Support WAN budget.
Support
Wireless LAN>>Station Control.
Improvement
Improved: Support 3G/4G dongles. (K5150/K4203)
Improved: Support RFC3021.
Improved: Support customized login page.
Improved: Add Wi-Fi 5G to dashboard.
Corrections
Corrected: Fix crash issue
caused by port-redirection.
Corrected: WUI User mode password over 24 char.
Corrected: Wi-Fi ping value got high.
- 2 -
Corrected: Wired 802.1x not work
Corrected: Remove FragFINN solution.
Corrected: Modify sentences on WUI.
Corrected: Lengthen True IP DMZ DHCP lease time.
Corrected: PPPoE WAN drop issue.
Corrected: Could not show "_" at
comment of bind IP to MAC.
Corrected: LAN DNS Wildcard supported PTR type.
Corrected: Support wildcard for LAN DNS.
Corrected: Wrong display of Dashboard CPU usage.
Corrected: VoIP Phone book issue.
Corrected: QoS speed was not accurate above 100Mbps.
Corrected: NAT sessions could not recycle.
Known Issue
The WAN port can not work well with Alcate
l I-040G device. The quick solution is to
add another switch between
Vigor2925 and Alcatel I-040G.
Notes
Modifications
None
NO:AP1101-2 V.1
Release Note for Vigor2925 Series
Firmware Version: 3.7.6
Release Date: November 20, 2014
Applied Models:
Vigor2925, Vigor2925n, Vigor2925n-plus, Vigor2925Vn-plus, Vigor2925F,
Vigor2925Fn
Vigor2925 series is a broadband r
outer which integrates IP la
yer QoS, NAT session/bandwidth
management to help users control works well with
large bandwidth. The state-
of-art routing feature,
VPN security, and Dual-WAN provide integrated bene
fits for professional us
ers and small offices.
New Features
Support higher throughput SSL VPN.
Support upgrade-able APPE signature.
Support multi-level WAN backup mechanism.
Support TACACS+ remote authentication.
Support Virtual IP Mapping for using virtua
l IPs for VPN LAN to LAN tunnel and NAT
these IPs to physical IP.
Support DNS filter object in
Firewall>>General Setup
.
Support configuration backup protection in
Maintenance>>Configuration Backup
.
Support WAN budget.
Support
Wireless LAN>>Station Control.
Improvement
Improved: Support 3G/4G dongles. (K5150/K4203)
Improved: Support RFC3021.
Improved: Support customized login page.
Improved: Add Wi-Fi 5G to dashboard.
Corrections
Corrected: Fix crash issue
caused by port-redirection.
Corrected: WUI User mode password over 24 char.
Corrected: Wi-Fi ping value got high.
- 2 -
Corrected: Wired 802.1x not work
Corrected: Remove FragFINN solution.
Corrected: Modify sentences on WUI.
Corrected: Lengthen True IP DMZ DHCP lease time.
Corrected: PPPoE WAN drop issue.
Corrected: Could not show "_" at
comment of bind IP to MAC.
Corrected: LAN DNS Wildcard supported PTR type.
Corrected: Support wildcard for LAN DNS.
Corrected: Wrong display of Dashboard CPU usage.
Corrected: VoIP Phone book issue.
Corrected: QoS speed was not accurate above 100Mbps.
Corrected: NAT sessions could not recycle.
Known Issue
The WAN port can not work well with Alcate
l I-040G device. The quick solution is to
add another switch between
Vigor2925 and Alcatel I-040G.
Notes
Modifications
None