Vigor3900 v108

版主: david

Vigor3900 v108

文章門神 » 週二 4月 1日, 2014年 7:59 am

1
Release Note for Vigor3900 Series
Firmware Version: 1.0.8
Release Date: March 11, 2014
Applied Model: Vigor3900
New Features

Same WAN VLAN ID can be used in different WAN interfaces. (WAN >> General
Setup Mode: Advance, Switch Mode: Double Tag)

Support QoS for multiple WANs.

Support SNMP v3.

Support country block for Firewall.

Support WCF white list.

Support LAN DNS server.

Support BGP routing protocol.

Support SSL VPN tunnel mode
(up to 20 tunnels).

Support Web Portal and Hotspot (Guest
profile) in User Management.

Support PPTP acceleration for PPTP WAN/Remote
Dial-in/LAN to LAN (125Mbps with
MPPE, greater than 900Mbps without MPPE).

Support QoS retag option.

Support VPN dial-out failover if WAN disconnected.

Support VPN LAN to LAN for overlap/duplicate subnets.

Display the last UP/DOWN log of VPN profile.

Add default policy for Firewall and de
fault block policy can be applied.

Add IPv6 firewall settings.

Add DNS object.

Add a remote capture telnet command (rc),
for traffic monitor and wireshark remote
capture.

Add front panel and VPN status on the dashboard.
Improvement
Web User Interface Change

Change the menu item “User Manageme
nt>>General Setup” into “User
Management>>Web Portal”.

Move IP Routing from LAN to Static
Route and rename as LAN/WAN Proxy ARP.
2

Move Inter-LAN Route from LAN>>Sta
tic Route to LAN>>General Setup.

Move status page to the fi
rst tab of each function menu.
Others

Improved: Support RADIUS, LDAP, Local
authentication in User Management.

Improved: Support NAT option for IPsec LAN to LAN.

Improved: Support LDAP
profile in Firewall.

Improved: Support ratio configur
ation for VPN Load Balancing.

Improved: Port number setting for Access Cont
rol in WAN IP alias can be passed to LAN
by default.

Improved: Notification object can be record
ed on Syslog through the configuration on
Applications>>SMS/Mail
Alert Service page.

Improved: Support Local/RADIUS/LDAP authentic
ation for PPTP/L2TP/PPPoE server at
the same time.

Improved: Change the priority of Inter-LAN r
oute, that IP filter
can do further control.

Improved: Support connection failover for TR-069.

Improved: Display router name in web page title.

Improved: IPsec VPN dial-in connection w
ith all WANs is supported in default.

Improved: Support RFC3021.

Improved: Combine IM/P2P/Protocol object
to App Object for blocking more Apps.

Improved: The number of Management Access Control List is increased up to 16.

Improved: Support peer identity for IPsec RSA authentication.

Improved: Support password encode
option for configuration backup.

Improved: Support more special character
s in username for user profile.

Improved: The number of SSL web proxy/VNC
/RDP profile is increased up to 30.

Improved: Support customized DDNS.

Improved: Support acceleration of fragment
ed UDP packets (maximum 1628 bytes).

Improved: Support DHCP option 95 (LDAP serve
r), 161(FTP server), and 162 (File path)
for DHCP server.

Improved: Support more subnet DHCP servers in Bind IP to MAC.

Improved: Support DHCP relay over
LAN/Non-Direct-Connected LAN.

Improved: Support DHCP relay se
ttings for PPTP/L2TP/PPPoE.

Improved: Support open port to the
host in remote VPN network.

Fixed: Default route cannot work well when
two WAN IPs are in the same IP network.
Known Issue

VPN Trunk tunnel doesn't work well when the pr
ofile name is more than 15 characters.

You need to disable "Force IPsec with
L2TP" options for pure L2TP tunnel in
VPN and
Remote Access >> PPP General Setup
.
ps:求助順序請直接
(1)電洽 04-2260-5121 / 0963-685-121
(2)http://line.naver.jp/ti/p/%40xat.0000132120.jmw 技術客服 LINE
(3)問題請優先洽詢 help@ublink.org
Telegram 頻道 Channel https://t.me/ublinkorg 韌體更新發佈
其他線上聯絡方式,http://www.ublink.org/index.php/contact
頭像
門神
 
文章: 6265
註冊時間: 週五 12月 8日, 2006年 11:10 am
來自: 台中
送出感謝: 16
擁有感謝: 0 次

回到 Draytek 軔體更新討論區

誰在線上

正在瀏覽這個版面的使用者:沒有註冊會員 和 22 位訪客

cron