Vigor 2920系列,v3331rc2支援3.5G華為E180

[門神]

Vigor 2920系列,v3331rc2支援3.5G華為E180

TEST OK

[tszyeung]

你好,

我已將我的2920n upgrade到v3.3.7 version, 之後嘗試把華為E180插上, 但發覺2920n不斷重新啟動,未能正常運作
不知道這個新的firmware是否已不再支援E180,
謝謝你的幫忙~~~

Joseph

[門神]

有接延長線嗎??

收一下syslog

http://www.ublink.org/index.php/compone ... yslog.html

我自己就是用E-180和E-220

[tszyeung]

謝謝你的回覆

沒有接延長線, 但是如果router都只是不停重新reboot, 但syslog可以正常運作嗎?

[門神]

Try it

[tszyeung]

已嘗試了, 請看看以下syslog, 請賜教....
謝謝 ~~

1662011-11-27 22:58:04Jan 1 00:00:02Vigor[USB]Usb Device Connected at Port 0
1662011-11-27 22:58:05Jan 1 00:00:02Vigor[USB]usb_set_configuration: configuration=1 
1662011-11-27 22:58:05Jan 1 00:00:02Vigor[USB]num of interfaces=2
1662011-11-27 22:58:05Jan 1 00:00:02Vigor[USB]Usb new device: Vendor ID [12D1], Product ID: [1003]
1662011-11-27 22:58:05Jan 1 00:00:02Vigor[USB]Manufacturer:[3] HUAWEI Technology
1662011-11-27 22:58:05Jan 1 00:00:02Vigor[USB]Product:[2] HUAWEI Mobile
1662011-11-27 22:58:05Jan 1 00:00:02Vigor[USB]Device Class:SubClass:Protocol = [00:00:00]
1662011-11-27 22:58:05Jan 1 00:00:02Vigor[USB]Per-interface classes
1662011-11-27 22:58:05Jan 1 00:00:02Vigor[USB]Interface: 0
1662011-11-27 22:58:05Jan 1 00:00:02Vigor[USB]Interface Class:SubClass:Protocol = [08:06:50]
1662011-11-27 22:58:05Jan 1 00:00:02Vigor[USB]Mass Storage device class
1662011-11-27 22:58:05Jan 1 00:00:02Vigor[USB]EndpointAddress=81 (in), Attributes=02 (Bulk) 
1662011-11-27 22:58:05Jan 1 00:00:02Vigor[USB]EndpointAddress=01 (out), Attributes=02 (Bulk) 
1662011-11-27 22:58:05Jan 1 00:00:02Vigor[USB]Interface: 1
1662011-11-27 22:58:05Jan 1 00:00:02Vigor[USB]Interface Class:SubClass:Protocol = [08:06:50]
1662011-11-27 22:58:05Jan 1 00:00:02Vigor[USB]Mass Storage device class
1662011-11-27 22:58:05Jan 1 00:00:02Vigor[USB]EndpointAddress=02 (out), Attributes=02 (Bulk) 
1662011-11-27 22:58:05Jan 1 00:00:02Vigor[USB]EndpointAddress=82 (in), Attributes=02 (Bulk) 
1662011-11-27 22:58:05Jan 1 00:00:02Vigor[USB]Usb Device Disconnected at Port 0
1662011-11-27 22:58:05Jan 1 00:00:02Vigor[3G] Modem_WakeUp Step 2......
1662011-11-27 22:58:05Jan 1 00:00:02Vigor[3G]Wake up modem: send command to interface 0x81 0x1
1662011-11-27 22:58:05Jan 1 00:00:02Vigor[3G]Set HuaWei E220 remote wakeup
1662011-11-27 22:58:05Jan 1 00:00:02Vigor[3G]ScsiTransaction Send CBW, res = 0x80845000
1662011-11-27 22:58:05Jan 1 00:00:02Vigor[3G]Get CSW, act = 0, res = 0xFFFFFFED, CSWStatus = 0
1662011-11-27 22:58:05Jan 1 00:00:02Vigor[3G]E169uChgMode modem change mode
1662011-11-27 22:58:06Jan 1 00:00:04VigorWAN2 DHCP ==>XID = 0x788b91b7, Client IP = 0.0.0.0, Your IP = 0.0.0.0, Next server IP = 0.0.0.0, Relay agent IP = 0.0.0.0, Option: 
1662011-11-27 22:58:06Jan 1 00:00:04VigorWAN2 DHCP <==XID = 0x788b91b7, Client IP = 0.0.0.0, Your IP = 124.244.250.112, Next server IP = 0.0.0.0, Relay agent IP = 124.244.250.1, Option: 
1662011-11-27 22:58:06Jan 1 00:00:04VigorWAN2 DHCP ==>XID = 0x788b91b7, Client IP = 0.0.0.0, Your IP = 0.0.0.0, Next server IP = 0.0.0.0, Relay agent IP = 0.0.0.0, Option: 
1662011-11-27 22:58:06Jan 1 00:00:04VigorWAN2 DHCP <==XID = 0x788b91b7, Client IP = 0.0.0.0, Your IP = 124.244.250.112, Next server IP = 0.0.0.0, Relay agent IP = 124.244.250.1, Option: 
1662011-11-27 22:58:06Jan 1 00:00:04VigorWAN 2 is up.
1662011-11-27 22:58:06Jan 1 00:00:04VigorWAN1 PPPoE ==> V:1 T:1 PADT ID:3598
1502011-11-27 22:58:07Jan 1 00:00:05VigorLocal User (MAC=00-19-D1-7D-0F-25): 192.168.1.22:33235 -> 74.125.71.18:443 (TCP) 
1582011-11-27 22:58:07Jan 1 00:00:05VigorLoad_balance 192.168.1.22 --(DEF)--> 74.125.71.18 go WAN2
1502011-11-27 22:58:08Jan 1 00:00:05VigorLocal User (MAC=00-19-D1-7D-0F-25): 192.168.1.22:39809 -> 74.125.71.83:443 (TCP) 
1582011-11-27 22:58:08Jan 1 00:00:05VigorLoad_balance 192.168.1.22 --(DEF)--> 74.125.71.83 go WAN2
1502011-11-27 22:58:08Jan 1 00:00:05VigorLocal User (MAC=00-19-D1-7D-0F-25): 192.168.1.22:60105 -> 66.220.145.39:80 (TCP)Web
1582011-11-27 22:58:08Jan 1 00:00:05VigorLoad_balance 192.168.1.22 --(DEF)--> 66.220.145.39 go WAN2
1662011-11-27 22:58:08Jan 1 00:00:06Vigor=====DDNS UPDATED SUCCESSFULLY(friends)===== 
1502011-11-27 22:58:08Jan 1 00:00:06VigorLocal User (MAC=00-19-D1-7D-0F-25): 192.168.1.22:46127 -> 74.125.71.189:443 (TCP) 
1582011-11-27 22:58:08Jan 1 00:00:06VigorLoad_balance 192.168.1.22 --(DEF)--> 74.125.71.189 go WAN2
1662011-11-27 22:58:09Jan 1 00:00:06Vigor=====DDNS UPDATED SUCCESSFULLY(tszyeung)===== 
1502011-11-27 22:58:09Jan 1 00:00:07VigorLocal User (MAC=00-19-D1-7D-0F-25): 192.168.1.22:39813 -> 74.125.71.83:443 (TCP) 
1582011-11-27 22:58:09Jan 1 00:00:07VigorLoad_balance 192.168.1.22 --(DEF)--> 74.125.71.83 go WAN2
1502011-11-27 22:58:09Jan 1 00:00:07VigorLocal User (MAC=00-19-D1-7D-0F-25): 192.168.1.22:33239 -> 74.125.71.18:443 (TCP) 
1582011-11-27 22:58:09Jan 1 00:00:07VigorLoad_balance 192.168.1.22 --(DEF)--> 74.125.71.18 go WAN2
1662011-11-27 22:58:10Jan 1 00:00:07Vigor[USB]Usb Device Connected at Port 0
1662011-11-27 22:58:10Jan 1 00:00:08Vigor[USB]usb_set_configuration: configuration=1 
1662011-11-27 22:58:10Jan 1 00:00:08Vigor[USB]num of interfaces=4
1662011-11-27 22:58:10Jan 1 00:00:08Vigor[USB]Usb new device: Vendor ID [12D1], Product ID: [1003]
1662011-11-27 22:58:10Jan 1 00:00:08Vigor[USB]Manufacturer:[3] HUAWEI Technology
1662011-11-27 22:58:10Jan 1 00:00:08Vigor[USB]Product:[2] HUAWEI Mobile
1662011-11-27 22:58:10Jan 1 00:00:08Vigor[USB]Device Class:SubClass:Protocol = [00:00:00]
1662011-11-27 22:58:10Jan 1 00:00:08Vigor[USB]Per-interface classes
1662011-11-27 22:58:10Jan 1 00:00:08Vigor[USB]Interface: 0
1662011-11-27 22:58:10Jan 1 00:00:08Vigor[USB]Interface Class:SubClass:Protocol = [ff:ff:ff]
1662011-11-27 22:58:10Jan 1 00:00:08Vigor[USB]Vendor class
1662011-11-27 22:58:10Jan 1 00:00:08Vigor[USB]EndpointAddress=81 (in), Attributes=03 (Interrupt) 
1662011-11-27 22:58:10Jan 1 00:00:08Vigor[USB]EndpointAddress=82 (in), Attributes=02 (Bulk) 
1662011-11-27 22:58:10Jan 1 00:00:08Vigor[USB]EndpointAddress=01 (out), Attributes=02 (Bulk) 
1662011-11-27 22:58:10Jan 1 00:00:08Vigor[USB]Interface: 1
1662011-11-27 22:58:10Jan 1 00:00:08Vigor[USB]Interface Class:SubClass:Protocol = [ff:ff:ff]
1662011-11-27 22:58:10Jan 1 00:00:08Vigor[USB]Vendor class
1662011-11-27 22:58:10Jan 1 00:00:08Vigor[USB]EndpointAddress=83 (in), Attributes=02 (Bulk) 
1662011-11-27 22:58:10Jan 1 00:00:08Vigor[USB]EndpointAddress=02 (out), Attributes=02 (Bulk) 
1662011-11-27 22:58:10Jan 1 00:00:08Vigor[USB]Interface: 2
1662011-11-27 22:58:10Jan 1 00:00:08Vigor[USB]Interface Class:SubClass:Protocol = [08:06:50]
1662011-11-27 22:58:10Jan 1 00:00:08Vigor[USB]Mass Storage device class
1662011-11-27 22:58:10Jan 1 00:00:08Vigor[USB]EndpointAddress=84 (in), Attributes=02 (Bulk) 
1662011-11-27 22:58:10Jan 1 00:00:08Vigor[USB]EndpointAddress=03 (out), Attributes=02 (Bulk) 
1662011-11-27 22:58:10Jan 1 00:00:08Vigor[USB]Interface: 3
1662011-11-27 22:58:10Jan 1 00:00:08Vigor[USB]Interface Class:SubClass:Protocol = [08:06:50]
1662011-11-27 22:58:10Jan 1 00:00:08Vigor[USB]Mass Storage device class
1662011-11-27 22:58:10Jan 1 00:00:08Vigor[USB]EndpointAddress=04 (out), Attributes=02 (Bulk) 
1662011-11-27 22:58:10Jan 1 00:00:08Vigor[USB]EndpointAddress=85 (in), Attributes=02 (Bulk) 
1662011-11-27 22:58:10Jan 1 00:00:08Vigor[3G] Detect first interface for 3G 0x81 0x82 0x1
1662011-11-27 22:58:10Jan 1 00:00:08Vigor[3G]Use bulk in pipe 0x82
1662011-11-27 22:58:10Jan 1 00:00:08Vigor[3G]Use bulk out pipe 0x1
1662011-11-27 22:58:10Jan 1 00:00:08Vigor[3G]Use interrupt in pipe 0x81
1662011-11-27 22:58:10Jan 1 00:00:08Vigor[3G]===>No available usb interface for 3G device !!!

[門神]

No available usb interface for 3G device

你要不要先接PC試試