New Features :
1. Support Hardware Protocol Acceleration.
2. Support various Ring Pattern types for FXS port.
3. Support "Loop Through To PSTN" message on VoIP Status page.
4. Support QoS telnet command.
5. Support "Select All" button in IM object page, P2P object page, Protocol object page and Misc Object page.
6. Support a telnet command to receive illegal ARP REPLY packet (Ethernet source address doesn't match ARP sender address).
7. Support "Traffic Graph" on Diagnostics page.
8. Support SIP account on user mode operation.
9. Display data in "green" when encrypted in VOIP Status page.
Improvements:
1. Improved: the stability for VoIP.
2. Improved: the problem of nmap scan
3. Improved: problem happened to SIP client registration. SIP ALG handle specific case; where the SIP proxy server is located in the LAN side; SIP Phone is located in the WAN side.
4. Corrected: IM-P2P mail alert not work.
5. Corrected: VPN routing can not be removed in special case.
6. Corrected: BytesSent & BytesReceived of TR069 display wrong values.
7. Corrected: login fail on WUI sometimes.
8. Corrected: crash problem for ProvisionKeepParameter of TR069.
9. Corrected: WUI firmware upgrade fails when the browser is Firefox 3.x.x.
10. Corrected: CPA query timeout while DMZ host enabled.
11. Corrected: WAN1 MAC is wrong after MAC address is set manually.
12. Corrected: PPTP WAN cannot dial out due to sending GRE encapsulated TCP packet to server.
13.Corrected: display problem of WCF and CSM LED.
14. Corrected: only one phone can loop through to PSTN when software relay and hardware relay loop through to PSTN.
15. Corrected: WAN IP Alias page cannot be cleared.
16. Corrected: display problem of IP ping telnet command.
17. Corrected: "phase1 mode" and "phase 1 proposal" can't be saved properly in IKE advanced settings page.
18. Change "VPN Connection Through" into "VPN Dial-Out Through".
Vigor2110 v3.3.0 下載