Vigor2910 v3.2.1 英文版 Release Note

[david]

[New Features]
1. Support more applications for CSM V2 lite version.
2. Support long filename for FTP Server of USB Disk.
3. Add 3G signal strength display in Online Status.
4. Support VPN remote dial in user for bandwidth limit.
5. Support VPN through second routing subnet (telnet command: vpn pass2nd on/off).
6. DNS servers can be set for WAN1 and WAN2 respectively.
7. Support different channels for wireless AP Discovery.

[Improvement]
1. Corrected: the router cannot process RIP packet over IPSec tunnel through VPN.
2. Corrected: when the WAN connection is active, LAN broadcast call (for VoIP) will fail.
3. Corrected: default SIP Account always uses first SIP account.
4. Corrected: when the phone is hung up, “call forward” still cannot be cancelled.
5. Corrected: Web firmware upgrade cannot work normally under FireFox3.
6. Corrected: Apple MAC cannot detect UPnP device in PPPoE mode.
7. Improve the compatibility problem between Filezilla and Firefox for FTP server.



Vigor2910 v3.2.1下載

[Tomb]

最近這幾版的Firmware
當我開BT時, CPU 常會衝到80%,90%以上,然後 2910就呈現掛點的狀態(Ping 無回應),
此時Session已經超過8000,9000了....

換比較舊版的Firmware就不會有這種情況!!

不知道是什麼原因?? 有人有遇過嗎??




PS:更新Firmware時,2910裡的設定都有清除重設!!

[門神]

Bandwidth Management >> Quality of Service

他預設是開的

把他Disable試試 ^^

[hill1031]

fx 3.1 beta 好像在設定上有問題 雖然fx 3.1還沒正式推出 不過我想可以提前著手修改 這樣用戶會更加支持和肯定你們的辛苦

[門神]

剛試了一下

不知您遇到怎樣的問題 !!

(請參考附圖)

[hill1031]

不好意思 忘記把我遇到的問題打出來 浪費版面
就是我在設定無線網路的時候 更改設定 按確定之後 發現到沒有改
但是實際上 我用IE打開 設定已經改過了 後來把FX關掉 再開啟 就有看到我的設定值了

不知道我是不是個案

[門神]

是否方便

viewtopic.php?t=2388

使用此方式我們試試 !!

[hill1031]

對不起 門神大 我可能沒辦法幫你 因為我也是在外地遠端操控

[門神]

^^

那可以幫我更精確的說一下是那個欄位嗎 !!