意思是前端不一定是 Vigor Route/Firewall 都可以使用統一設定 VigorAP
AP-based Access Point Management (APM)
原文說明
https://www.draytek.com/support/knowledge-base/7683
備註: 舊機型不支援 Older model Vigor Access Points (AP700/AP800/AP900) cannot be managed using AP-Based APM.
For Central AP Management, the Root Access Point must be enabled for AP operation mode.
Before setting up AP-based APM, ensure NodeAP is enabled for the VigorAPs to be managed.
支援的型號版本(型號不同,台數不同)
![圖檔](http://www.ublink.org/images/DrayTek/rootap/APM_topology.png)
VigorAP Firmware Version
VigorAP 1060C 1.3.8 (50)
VigorAP 960C 1.3.9 (30)
VigorAP 920R 1.4.1 (30)
VigorAP 918R 1.4.1 (30)
VigorAP 912C 1.4.0 (20)
VigorAP 903 1.3.5 (20)
VigorAP 802 1.3.5
VigorAP 1000C 1.4.1
![圖檔](http://www.ublink.org/images/DrayTek/rootap/1-nodeAP_enabled.png)
![圖檔](http://www.ublink.org/images/DrayTek/rootap/2-select_NodeAP.png)
Enable RootAP 功能後
就可以挑選 ClientAP
挑進來之後就可以同步 RootAP 的設定了
![圖檔](http://www.ublink.org/images/DrayTek/rootap/3-nodeAP_status.png)
一樣都有狀態可以查看
![圖檔](http://www.ublink.org/images/DrayTek/rootap/4-config_sync.png)
![圖檔](http://www.ublink.org/images/DrayTek/rootap/5-overload_managment.png)
以上