1 頁 (共 1 頁)

Vigor 2920 v361 Release

文章發表於 : 週三 8月 22日, 2012年 9:19 am
門神
- 1 -
NO:AP1101-2 V.1
Release Note for Vigor2920 Series
Firmware Version: 3.6.1
Built Date: August, 03, 2012
Applied Models:
Vigor2920/Vigor2920n/2920Vn/Vigor2920F/Vigor2920Fn/Vigor2920FV/
Vigor2920FVn
Vigor2920 series, a firewall broadband router with dual-WAN interface, can connect to
xDSL/cable/VDSL2/Ethernet. The gigabit 2nd WAN and 4-port gigabit LAN switch facilitates
unified communication applications in business CO/remote site to handle large data from
subscribed fatter pipe. The state-of-art routing feature, VPN security, and Dual-WAN provide
integrated benefits for professional users and small offices.
New Features
.. Support the load-balance policy function which integrates the routing requirement for IP
routing subnet.
.. Add a new feature that you can select HTTPS or HTTP in User Management for web
authentication.
Improvement
.. Corrected: If IPv6 PPP mode is configured without service, IPv4 WAN connection will
restart continually.
.. Corrected: Crash problem might occur while GRE IPsec tunnel is used.
.. Corrected: Port redirection of WAN1 IP doesn't work when port redirection setting is not
listed in WAN1 IP alias.
.. Corrected: True IP DMZ may not work.
.. Corrected: Incorrect wireless country string which will be checked by Linux and MAC
OS.
.. Corrected: A user can send a FAX not only using T.38 protocol but also G.711.
.. Improved: Improve the performance for Huawei E398/K5005 and Sierra 320U dongle.
.. Improved: Improve ALG for SoftPhone Polycom and lift-size.
.. Improved: The range for Bandwidth Limit can be set from 0 to 30000.
.. Improved: Improve redirect page method of User Management for Safari.
.. Improved: Add WAN Status Signal parameter of 3G WAN connection for TR-069.
- 2 -
.. Improved: Rename "Undefined Protocol" with "Unassigned Numbers" for the DoS
function.
.. Improved: Rename TR-069 parameter of
"InternetGatewayDevice.X_00507F_Firewall.DoSDefense.BlockUnknownProto"
with "InternetGatewayDevice.X_00507F_Firewall.DoSDefense.BlockUnassignedNum".
Related Information
.. Get the document, please visit
http://www.draytek.com/user/PdInfoDetail.php?Id=117
.. Get the new firmware, please visit
http://www.draytek.com/user/SupportDownloads.php
.. Get the customer service support, please visit
http://www.draytek.com/user/ContactHead ... adquarters
.. Get the regulatory compliance information
http://www.draytek.com/user/AboutRegulatory.php
.. Get information for global partners
http://www.draytek.com/user/Globalpartners.php
Known Issue
.. None
Notes
Modifications
.. None

Re: Vigor 2920 v361 Release

文章發表於 : 週四 10月 4日, 2012年 2:22 pm
LosAngeles
Hi 門神,

I would like to report a bug in the firmware v3.6.1 of Vigor 2920n router. I have two WAN connections connecting to the router and the internal LAN IP of my PC is set to route through the WAN2. However, I found that the outgoing traffic of my PC is still passed through WAN1 instead of WAN2 even though I have restarted the router or reset the load-balancing policies of router configuration. When I downgraded the firmware from v3.6.1 to v3.6.0, everything goes fine. The load balancing function operates correctly. Could you help to test whether it is the bug in the latest firmware of Vigor 2920? If so, could you help to report the bug to DrayTek?

Thanks and Regards,

Jacky

Re: Vigor 2920 v361 Release

文章發表於 : 週四 10月 4日, 2012年 2:33 pm
門神
抓圖
Mail到support@draytek.com.tw
Thank You !!

更新的Release Note都會寫
或是我們都會提醒

更版如果有異常的狀況
請RESET重新設定

因為有可能後一版更新不認前一版的Config